ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Forge

Créé par

Forge

18. octobre 2026NO
20
0
0
0
0

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered

Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours. The picture: steel sewing needles (Wikimedia Commons).
Intermédiaire
Half a day

Consignes

1

Cut, soften and straighten

Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.

Matériaux pour cette étape :

Corde à pianoCorde à piano70 mm

Outils nécessaires :

Pince coupantePince coupante
Forge de forgeronForge de forgeron
Pince à becs longsPince à becs longs
EnclumeEnclume
2

Point

Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.

Outils nécessaires :

Jeu de limesJeu de limes
Étau d'établiÉtau d'établi
Lunettes de sécuritéLunettes de sécurité
3

Flatten and pierce the eye

Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.

Outils nécessaires :

EnclumeEnclume
Marteau à panne fendanteMarteau à panne fendante
Chignole à mainChignole à main
Jeu de limesJeu de limes
Étau d'établiÉtau d'établi
Lunettes de sécuritéLunettes de sécurité
4

Harden in oil

Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.

Outils nécessaires :

Forge de forgeronForge de forgeron
Pince à becs longsPince à becs longs
Bac de trempe à l'huileBac de trempe à l'huile
Lunettes de sécuritéLunettes de sécurité
5

Temper

Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.

Outils nécessaires :

Four de traitement thermiqueFour de traitement thermique
Thermocouple avec afficheurThermocouple avec afficheur
EnclumeEnclume
Marteau à panne fendanteMarteau à panne fendante
6

Scour and polish

Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.

Outils nécessaires :

Toile émeriToile émeri
Huile d'oliveHuile d'olive
SavonSavon
SciureSciure
Cuir à rasoirCuir à rasoir
Jeu de limesJeu de limes

Matériaux

1

Outils requis

17

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...