Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Tangent Galvanometer: 8 Turns on an 11-Inch Wooden Ring with a Pocket Compass (Boy Mechanic, 1913)
Penny

Créé par

Penny

14. novembre 2026DK
5
0
0
0
0

Tangent Galvanometer: 8 Turns on an 11-Inch Wooden Ring with a Pocket Compass (Boy Mechanic, 1913)

A current meter from a wooden ring wound with eight turns of wire and a pocket compass at its centre: set the coil north-south, pass the current, and the needle's swing gives the amperes from a table (0.5 A at 45 degrees).
Intermédiaire
An afternoon

Consignes

1

The tangent law

Chargement du notebook Jupyter…
2

Read the Boy Mechanic

"Any deviation from the dimensions will cause errors in the results obtained by its use."
3

Make the ring

From 1/2 in wood cut a ring 10-1/2 in outside and 9 in inside. Glue on each side a 1/4 in ring, 9 in inside and 11 in outside, to form a 1/4 in channel round the edge (or turn it from solid). Use brass screws and brads only.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Colle à boisColle à bois1 pièce

Outils nécessaires :

Scie à chantournerScie à chantourner
BoussoleBoussole
4

Wind the coil

Wind 8 turns of No. 16 insulated magnet wire in the channel and tie the ends.

Matériaux pour cette étape :

Fil de cuivre émailléFil de cuivre émaillé1 pièce
FicelleFicelle1 pièce
5

Base

Cut a round base 11 in across with a slot 1 in wide and 6-5/16 in long in the middle. Stand the ring in it with its inner surface level with the top of the base, held by a small strip screwed to the base. Fit two binding posts and connect the coil ends.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Borne de sortieBorne de sortie1 pièce
Vis à boisVis à bois1 pièce

Outils nécessaires :

Scie à chantournerScie à chantourner
Vilebrequin et mècheVilebrequin et mèche
6

Mount the compass

Fix two strips 1/4 x 5/8 x 11 in across the ring with their top edges exactly through its centre, and set a pocket compass about 1-1/4 in across in them, needle centre at the ring centre, zero half-way between the strips. Coat everything with brown shellac.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Boussole magnétiqueBoussole magnétique1 pièce
Vernis à la gomme laqueVernis à la gomme laque1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
7

Set up and read

Keep iron, steel and magnets away. On a level table turn it until the needle lies in the plane of the coil at zero. Connect the circuit; 45 degrees means 1/2 ampere; use the table for other angles. His table holds near Chicago and east of it north of the Ohio; multiply by 1.3 south of the Ohio and east of the Mississippi.
8

Troubleshooting

Galvanometer troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), pp. 150-151 (checked on the archive.org scan boymechanic0000unse_n5a8). His table equals 0.5 x tan(angle); the field-strength note and modern enamelled wire are ours.

Matériaux

8

Outils requis

4

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...