Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
Débutant
An hour plus calibration
Consignes
1
1
How it floats
How it floats
Chargement du notebook Jupyter…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3
3
Mount the jar
Mount the jar
Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.
Matériaux pour cette étape :
Tubes à essai1 pièce
Planche de bois dur1 pièceOutils nécessaires :
Vilebrequin et mèche4
4
Load the float
Load the float
Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.
Matériaux pour cette étape :
Tubes à essai1 pièce
Lingot de plomb1 pièce
Plâtre de Paris1 pièce5
5
Seal it
Seal it
Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.
Matériaux pour cette étape :
Bouchons de liège1 pièce
Vernis à la gomme laque1 pièce
Résine de pin1 pièceOutils nécessaires :
Fer à souder6
6
Mark the water line
Mark the water line
Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.
Matériaux pour cette étape :
Eau distillée1 pièceOutils nécessaires :
Limes (lime à main)7
7
Calibrate
Calibrate
Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.
Matériaux pour cette étape :
Eau distillée1 pièceOutils nécessaires :
Limes (lime à main)8
8
Troubleshooting
Troubleshooting
Hydrometer troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.
Matériaux
8- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 2 piècesEspace réservé
Outils requis
3- Espace réservé
- 2 vendors sell this, none ship to you yetEspace réservé
- Espace réservé
Ce plan fabrique
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

