ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

The Forage Harvester: Chopping Green Crop to a Set Length
Silage is green crop — grass, maize, legumes — packed tight and left to ferment so it keeps through winter. It keeps only if it is chopped short and evenly enough to pack out the air. For decades the crop was cut and carted to a stationary silage cutter at the silo. The field forage harvester does the chopping in the field: it picks up or cuts the crop, feeds it between rollers into a cutterhead of knives, and blows the chop up a spout into a trailer.
Sir Charles Ross thought of joining a pick-up to an ensilage cutter and blower powered by an engine riding on the rig; Professor Floyd Duffee improved it; the Fox River Tractor Company tried a mower-type chopper in 1931 and sold a cutter-bar chopper from 1940, and in 1942 Gehl became the first to mass-produce forage harvesters.
This rung works out the length of cut, the flywheel's reserve and the spout speed, and builds a paper-strip model that shows the length of cut directly.
Débutant
About 3 hours
Consignes
1
1
Length of cut, flywheel reserve and spout speed
Length of cut, flywheel reserve and spout speed
Chargement du notebook Jupyter…
2
2
Model the cut with a paper strip
Model the cut with a paper strip
No knives needed. Wind a 50 mm strip of kraft paper onto a spool driven by a geared DC motor, so the strip is pulled past a point at a steady speed — that is the feed rolls. Measure the feed speed with a rule and stopwatch.
Screw a plywood arm to the shaft of a second geared motor, with a felt marker at its tip that dabs the paper once a turn as it sweeps past — that is one knife. Measure its speed with the tachometer.
Run both and measure the spacing of the dabs: it is $v_f / (z n)$ with $z = 1$. Add a second marker on the opposite end of the arm ($z = 2$) and the spacing halves; slow the feed and it shrinks again. Every setting of a real harvester's length of cut is one of these two changes.
Matériaux pour cette étape :
Rouleau de papier kraft (brun)1 pièce
Motoréducteur à courant continu2 pièces
Panneau de contreplaqué1 pièce
Vis à métaux6 piècesOutils nécessaires :
Alimentation en courant continu
Tachymètre numérique
Chronomètre
Règle
Perceuse sans fil
Pistolet à colle chaude
Marqueur permanent3
3
Where a pulled harvester gets its power
Where a pulled harvester gets its power
A tractor-drawn forage harvester is driven from the tractor's power take-off. The embedded blueprint covers the shaft, its universal joints and its dangers.
4
4
Chop coming out wrong
Chop coming out wrong
Forage harvester problems show in the trailer.
Flow
Loading...
5
5
History and honest limits
History and honest limits
**Sir Charles Ross** proposed joining a pick-up to an ensilage cutter and blower with its own engine; **Professor Floyd Duffee** improved the idea; the **Fox River Tractor Company** built an experimental chopper in 1931 and marketed a cutter-bar chopper from 1940; **Gehl** began mass production in 1942. Self-propelled harvesters with kernel processors now chop whole maize crops.
**Honest limits.** The theoretical length of cut assumes the crop is fed straight; in practice it varies. The flywheel figures are a simple solid-disc model. A cutterhead is lethal: it keeps turning long after the drive stops, and blockages must only be cleared with the engine off and the head stationary.
Matériaux
4- Espace réservé
- Espace réservé
- 1 pièceEspace réservé
- 6 piècesEspace réservé
Outils requis
7- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- 1 vendor sell this, none ship to you yetEspace réservé
- Espace réservé
- Espace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes

McCormick Reaper
par Martin
ENVIRONNEMENT
50
0
0
0
0
0

The Power Take-Off: Sending the Tractor's Engine Back Down a Shaft
par Martin
Mécanique
37
0
0
0
0
0

The Crank and the Flywheel: Smoothing One Bang in Two Turns
par Martin
Mécanique
37
0
0
0
0
0

The Sirocco Fan: Many Shallow Forward-Curved Blades
par Emma
Mécanique
47
0
0
0
0
0

Egyptian Grain Silo — Constructing a Beehive-Shaped Grain Silo
par Emma
Maçonnerie
111
0
0
0
0
0
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.