ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

The Gas Turbine: When the Turbine Finally Beat Its Own Compressor
Compress air, burn fuel in it, and expand the hot gas through a turbine that also turns the compressor. The idea is simple and old. Making it work took until 1903, when the Norwegian engineer Ægidius Elling ran the first gas turbine that delivered more power than its own compressor consumed.
The difficulty is arithmetic. The compressor takes most of what the turbine makes, so small losses in either machine wipe out the net output entirely. It needed efficient compressors and turbine metal that could stand red heat — and the Whittle turbojet in this catalogue is the result.
This rung works out the arithmetic, then demonstrates it safely with an air turbine and a compressor on the bench.
Intermédiaire
About 3 hours
Consignes
1
1
Net work: turbine minus compressor
Net work: turbine minus compressor
Chargement du notebook Jupyter…
2
2
Demonstrate the energy bill with compressed air
Demonstrate the energy bill with compressed air
No combustion here. Print a small impulse air turbine — a 60 mm wheel with 20 cupped buckets — on the shaft of a hobby motor used as a generator, with a 330 Ω load and the multimeter across it. Blow it with the air compressor through the regulator and a nozzle made from a short piece of tube.
Measure the electrical power out (V² ÷ R). Then measure the power the compressor draws from the wall while it runs — the clamp meter on the live conductor, times the mains voltage.
The turbine returns a tiny fraction of what the compressor took. That is the gas turbine's problem without the fuel: compression is expensive, and only by adding heat between compressor and turbine does the turbine get back more than it cost.
Matériaux pour cette étape :
Filament PETG30 g
Motoréducteur1 pièce
Résistance de 330 ohms1 pièce
Tuyau vinyle transparent0.5 mètreOutils nécessaires :
Compresseur d'air
Détendeur régulateur de pression
Multimètre
Pince ampèremétrique CA/CC 600 A
Imprimante 3D à filament (FDM)
Lunettes de sécurité transparentes
Protection auditive (casque, SNR 30 dB)3
3
History and context
History and context
**Ægidius Elling, Norway, 1903** — the first gas turbine to deliver net power — more than its own compressor consumed. No patent number is asserted here, and the details of his machine are left to the sources; the principle is the payload. Earlier attempts had failed exactly as the notebook predicts: the compressor ate all the turbine's output.
The line runs through Büchi's turbocharger (the next rung) — a gas turbine driving a compressor, fed by an engine's exhaust — to the Whittle turbojet and the power-station gas turbine.
**Honest limits.** Efficiency depends on turbine inlet temperature, which is limited by materials and cooling; small gas turbines are inefficient; and part-load efficiency falls away. **Do not build a combustion gas turbine**: the parts spin at speeds where a failure is a shrapnel event, and the combustor is a blowtorch.
Matériaux
4- 30 gEspace réservé
- Espace réservé
- 1 pièceEspace réservé
- 0.5 mètreEspace réservé
Outils requis
7- 1 vendor sell this, none ship to you yetEspace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes

Parsons Steam Turbine
par Martin
Physique
50
0
0
0
0
0

The Heat of Compression: Why Compressed Air Is Hot and Wet
par Martin
Mécanique
38
0
0
0
0
0

The Screw Compressor: A Built-In Ratio, and the Cost of the Wrong One
par Martin
Mécanique
38
0
0
0
0
0

The Rotary Regenerator: Store Heat in a Wheel and Carry It Across
par Martin
Mécanique
37
0
0
0
0
0

The Sirocco Fan: Many Shallow Forward-Curved Blades
par Emma
Mécanique
47
0
0
0
0
0
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.