ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

The Lithium-Ion Cell: A Host Instead of a Metal
The cathode was solved first. Goodenough's lithium cobalt oxide could give lithium up and take it back, reliably, at four volts. The problem was the other end of the cell: whatever you paired it with had to accept that lithium and give it back again, thousands of times, without growing the metal needles that had killed every rechargeable lithium cell so far.
Akira Yoshino's answer in 1985 was to stop storing lithium as a metal at all. Use a piece of carbon as a **host lattice** and let the lithium live between its layers. Nothing plates, nothing grows, and the cell can be built in the discharged state, which makes it safe to manufacture.
This rung reads that patent, measures a modern cell against it, and works out what the idea actually bought — in watt-hours per kilogram, and in the number of cells a tool pack needs.
Intermédiaire
About 3 hours
Consignes
1
1
Read the claim, including what it rules out
Read the claim, including what it rules out
**US 4,668,595**, *Secondary battery*, Akira Yoshino, Kenichi Sanechika and Takayuki Nakajima, assigned to Asahi Kasei Kogyo, Osaka; filed **9 May 1986** with Japanese priority from May 1985, granted **26 May 1987**, long expired. The figure on this page is its own FIG. 1: the cathode (1), the anode (2), their current collectors (3, 3'), the leads (5, 5'), the separator (7) and the case (6, 8).
The patent's subject is the **negative** electrode, and the claim is unusually specific about what will and will not work:
- The anode is a **carbonaceous material**, not lithium metal and not a lithium alloy.
- It must be neither **over-graphitised** nor **under-carbonised** — the patent bounds it by X-ray spacing and by a **BET surface area of 0.1 to 100 m²/g**.
- Paired with a lithium-containing oxide cathode, the result has *very stable cyclicity*, is *small and light*, and has *high energy density*.
Write down that middle bullet, because it is the one that reads like a footnote and is actually the invention. Plenty of people had put lithium into carbon. The patent is about **which carbon**, and it names the window by measurement rather than by recipe — which is exactly the form a fact has to take to be useful to anyone else.
Note what is *not* claimed: the cathode is Goodenough's lithium cobalt oxide, already published and already in the catalogue as its own rung. This patent is one half of a cell, and it says so.
2
2
Measure a cell's open-circuit curve, and find the plateau
Measure a cell's open-circuit curve, and find the plateau
Take one 18650 cell in a holder. Charge it with the charger board to its full 4.2 V and let it rest for thirty minutes — resting matters, because you want the *open-circuit* voltage, not the voltage the last current left behind.
Discharge it at a gentle, constant current. A 10 W power resistor of about 4.7 Ω pulls roughly 0.8 A from a cell at 3.7 V, which is a comfortable C/4. Mount the resistor on a heat sink, clear of anything that can burn; it will get genuinely hot.
Every ten minutes: disconnect the load, wait one minute, read the open-circuit voltage, reconnect. Also read the loaded voltage each time. Stop at **3.0 V under load** and do not go below it — over-discharging a lithium cell dissolves its copper current collector and the damage is permanent and invisible.
Plot open-circuit voltage against elapsed time. You should get the shape in the patent's FIG. 2: a steep drop at the top, a long flat plateau, a steep fall at the end. That plateau is intercalation happening at a nearly constant chemical potential, and it is both the great virtue of the cell — a steady supply voltage — and the reason you cannot tell its state of charge from its voltage, which is why rung 3's pack needs a coulomb counter and rung 7 needs cell taps.
Multiply current by time to get amp-hours delivered. Compare with the figure printed on the cell. Step 3 turns that number into the patent's own axis.
Matériaux pour cette étape :
Accumulateur lithium 186501 pièceOutils nécessaires :
Support de piles
Carte de charge LiPo
Power Resistor Kit - 10W (25 pack)
Assortiment de dissipateurs (aluminium)
Multimètre numérique — sélection automatique, TRMS
Moniteur de batterie (compteur de coulombs)
Chronomètre
Cordons de test à pinces crocodile
Lunettes de sécurité transparentes
Cahier de laboratoire (avec copie)3
3
From amp-hours to lithium per carbon atom
From amp-hours to lithium per carbon atom
Chargement du notebook Jupyter…
4
4
Look at the layers, and at what they are not
Look at the layers, and at what they are not
You cannot open a lithium cell safely, and you should not try. But you can hold the anode material in your hand, because it is the same graphite that is in a pencil and the same carbon black that is in a printer.
Put a little graphite powder and a little carbon black side by side on white paper and look at them under the digital microscope. Graphite is flaky, reflective and plate-like, because it *is* stacked sheets. Carbon black is matt and fluffy, a mass of tiny near-spherical particles, and it has an enormous surface area for its mass.
That contrast is the patent's window made visible. The lithium has to slide between the sheets, so you need the sheets; but every square metre of exposed surface is somewhere the electrolyte decomposes on the first charge, consuming lithium permanently in the layer called the SEI. Too flaky and the layers exfoliate; too fluffy and the first charge eats your capacity. The patent's 0.1–100 m²/g is the survivable gap between those two failures.
Rub a little graphite between your fingers and feel it lubricate. That slipperiness is the sheets sliding — the same property that lets a lithium ion in and out ten thousand times.
Wear gloves and work over a tray: both powders travel, both are conductive, and carbon black in particular will find its way onto every surface in the room and into any circuit you have left open on the bench.
Matériaux pour cette étape :
Poudre de graphite1 pièce
Poudre de noir de carbone1 pièceOutils nécessaires :
Microscope numérique
Pince brucelles à pointes fines
Gants en nitrile
Lunettes de sécurité transparentes5
5
History and context
History and context
**Attribution.** US 4,668,595, *Secondary battery*, Akira Yoshino, Kenichi Sanechika and Takayuki Nakajima, Asahi Kasei Kogyo Kabushiki Kaisha; filed 9 May 1986, granted 26 May 1987, expired. Yoshino shared the 2019 Nobel Prize in Chemistry with John Goodenough and M. Stanley Whittingham for this line of work — Whittingham for the idea of intercalation, Goodenough for the cobalt-oxide cathode, Yoshino for the carbon anode that made a whole cell practical.
**Why the anode was the hard half.** Whittingham's 1970s cells used lithium metal and caught fire. Moli Energy's rechargeable lithium cells were recalled in 1989 for the same reason. The industry knew the energy was there; what it could not do was get the lithium back out of the negative electrode in a shape that would not grow. Yoshino's move was to give up storing it as a metal, accept roughly a third less capacity at that electrode, and get a cell that could be cycled a thousand times without growing anything.
There is a second, quieter advantage in the claim: with a carbon anode the cell is **assembled discharged**, with all the lithium in the cathode. Nothing in the factory is ever a reactive metal foil. That is a manufacturing fact, not a chemistry one, and it is part of why this design scaled and the others did not.
**Honest limits.** The plateau that makes lithium-ion such a good supply also makes its state of charge hard to read, which every later rung in this batch has to work around. The SEI layer consumes lithium on the first charge and keeps slowly consuming it for the cell's whole life, so capacity fades whether you use the cell or not. Charging below about 5 °C plates lithium metal after all — the failure the design was meant to avoid, reintroduced by the user. And the cobalt in the cathode carries a real and well-documented mining cost, which is why the chemistry has kept moving since.
Matériaux
3- Accumulateur lithium 1865010 % de commission1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
Outils requis
13- Support de piles10 % de commissionMagento Legacy Storeships internationallyEspace réservé
- Carte de charge LiPo10 % de commissionEspace réservé
- Power Resistor Kit - 10W (25 pack)10 % de commission€4.96
- Assortiment de dissipateurs (aluminium)10 % de commissionEspace réservé
- Espace réservé
- Moniteur de batterie (compteur de coulombs)10 % de commissionEspace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Cahier de laboratoire (avec copie)10 % de commissionEspace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes

Dangereux
Lithium Cobalt Oxide Cathode
par Peter
Matériaux
38
0
0
0
0
0

Dangereux
Extracting Lithium from Spodumene — The Lightest Metal That Powers the Future
par Peter
Exploitation Minière
48
0
0
0
3
0

The Sealed Cell: Catching the Gas Before It Leaves
par Mary
Énergie
5
0
0
0
0
0

Dangereux
Nickel-Metal-Hydride Electrode
par Mary
Matériaux
35
0
0
0
0
0
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.