ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice
TheChef

Créé par

TheChef

30. septembre 2026DK
9
0
0
0
0

The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice

A lemon squeezer lets the seeds through with the juice, or crushes them into it, and its holes clog with pulp. Thomas Reece and Arthur Clarke of Philadelphia, Pennsylvania, received US 61,251, dated 15 January 1867, for a squeezer of two cups of metal or wood on handles "pivoted together at x, so that the cups may be separated or brought together similar to the blades of a pair of shears." The larger cup has a small recess in its bottom with slots radiating from its centre, so formed "as not to allow any seed to pass through them", and the smaller cup has a flange that stops it going too far into the other. This rung works out the squeeze through the crossed handles, with a work check, then makes the squeezer from two tins on flat-bar handles, and squeezes lemons with it.
Intermédiaire
About 4 hours

Consignes

1

Crossed handles

Chargement du notebook Jupyter…
2

A hinged squeezer before it

The embedded blueprint pins its handles at their front ends. Reece and Clarke cross theirs like shears and slot the recess so seeds stay behind.
3

Read US 61,251

"The cup B is made smaller than cup A, and works within it with its bottom down. This cup B is provided around its mouth with a flange, d, which catches upon the mouth of cup A when the two cups are brought together, as shown in Figure 1. These cups are provided with the handles C and D, which said handles are pivoted together at x, so that the cups may be separated or brought together similar to the blades of a pair of shears." "The space between the two cups allows the juice to be pressed out through the slots or openings without breaking the seed, and the slots are so formed and are of such a size as not to allow any seed to pass through them."
4

Make the squeezer and press lemons

**Handles.** Cut two 25 cm lengths of 20 × 5 mm mild steel flat bar and drill each 8 cm from one end for an M6 pivot bolt, so they cross like shears. **Cups.** Cut the bottoms from two clean tin cans, one about 8 cm across and one about 6.5 cm, each 3 cm deep. In the larger one's base, hammer a small recess over a hole in a hardwood block, and cut four narrow slots in it radiating from the centre, 2 mm wide. Rivet a ring of tinplate round the smaller one's mouth as the flange d. **Assemble.** Rivet each cup to the short end of a handle so the smaller cup, bottom down, closes into the larger one when the handles are squeezed, and bolt the handles at the pivot. **Test.** Halve a lemon, put one half cut side down in the larger cup over a glass, and squeeze. Count the seeds left in the cup and in the glass, and weigh the juice.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux0.5 mètre
Boîte de conserveBoîte de conserve2 pièces
Tôle de fer-blancTôle de fer-blanc1 pièce
Rivets aveuglesRivets aveugles8 pièces
Assortiment de boulons à tête hexagonaleAssortiment de boulons à tête hexagonale1 pièce
Écrou hexagonalÉcrou hexagonal1 pièce
Bloc de bois durBloc de bois dur1 pièce
CitronCitron2 pièces

Outils nécessaires :

Scie à métauxScie à métaux
Perceuse sans filPerceuse sans fil
Jeu de foretsJeu de forets
Limes (lime à main)Limes (lime à main)
Jeu de limes aiguillesJeu de limes aiguilles
Étau d'établiÉtau d'établi
Cisaille à tôleCisaille à tôle
MarteauMarteau
Kit de riveteuseKit de riveteuse
Clé à moletteClé à molette
Couteau de cuisineCouteau de cuisine
Balance de cuisine numériqueBalance de cuisine numérique
Verre à boireVerre à boire
Gants de travail en cuirGants de travail en cuir
5

A squeezer that lets seeds through, clogs or sprays

Shears-cup lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**Thomas Reece and Arthur Clarke** of Philadelphia, Pennsylvania, received US 61,251, dated 15 January 1867. The cups could be metal, galvanized, or wood tinned against the acid; the peculiar shape of cup A with its recess kept the squeezer from clogging or choking. Their claim is the two hinged handles with the two cups, one with a slotted recess and the other with a flange. **Honest limits.** Tin cans and flat bar stand in for their made-up cups and handles. The notebook ignores friction; its forces and lengths are examples. Your seed count and juice are the result.

Matériaux

8

Outils requis

14

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...