Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Cam-Lock Drill-Press Vise: Holed Steel Bed, Pinned Jaws and an Eccentric Cam (Popular Mechanics, 1920)
Forge

Créé par

Forge

15. novembre 2026NO
7
0
0
0
0

Cam-Lock Drill-Press Vise: Holed Steel Bed, Pinned Jaws and an Eccentric Cam (Popular Mechanics, 1920)

C. H. Willey's quick-acting vise for the drill-press table (Popular Mechanics, 1920): a 1/2 x 3 in. steel bed drilled with 5/8 in. holes 7/8 in. apart and bolted down on slotted end pieces, a fixed jaw pinned into any hole, a sliding jaw kept on the bar by a riveted cross pin, and an eccentric cam on a handle that locks the work.
Intermédiaire
A day

Consignes

1

The steps

Chargement du notebook Jupyter…
2

Read Willey

"A very efficient, quick-opening and closing vise for the drill-press table."
3

Make the bed

Cut a bed bar from 1/2 x 3 in. (13 x 76 mm) steel to suit your table (length ours). Drill a row of 5/8 in. (16 mm) holes 7/8 in. (22 mm) apart along its middle.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
PointeauPointeau
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
4

Make the end supports

Cut two short pieces of the same stock, slot them for bolts to the drill-press table and fix one under each end of the bed (ours: bolted), so the bed stands clear of the table.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux1 pièce
Assortiment de boulons à tête hexagonaleAssortiment de boulons à tête hexagonale1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
Limes (lime à main)Limes (lime à main)
5

Make the fixed jaw

Cut out a steel block underneath so it straddles the bed (stock and size ours). Drive a pin into it, downward, that fits the 5/8 in. holes.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux1 pièce
Rond en acier douxRond en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Limes (lime à main)Limes (lime à main)
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
Marteau à panne bombéeMarteau à panne bombée
6

Make the sliding jaw

Cut a second block the same way. Pass a horizontal pin across the opening below the bed and rivet it to the jaw's sides, so the jaw slides along the bar but cannot lift off.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux1 pièce
Rond en acier douxRond en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Limes (lime à main)Limes (lime à main)
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
Marteau à panne bombéeMarteau à panne bombée
Étau d'établiÉtau d'établi
7

Make the cam

Saw a disk off steel shafting. Drive a pin that fits the 5/8 in. holes into one face, off centre. At right angles to it, drill a hole in the rim and fit a handle.

Matériaux pour cette étape :

Arbre en acierArbre en acier1 pièce
Rond en acier douxRond en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
Marteau à panne bombéeMarteau à panne bombée
8

Use it

Bolt the bed to the table. Set the fixed jaw's pin in the hole that suits the work, slide the jaw up, drop the cam pin into the hole behind it and swing the handle to lock the work.

Matériaux pour cette étape :

Assortiment de boulons à tête hexagonaleAssortiment de boulons à tête hexagonale1 pièce

Outils nécessaires :

Perceuse à colonnePerceuse à colonne
9

Troubleshooting

Drill vise troubleshooting.

Flow

Loading...
10

History and honest limits

From C. H. Willey, "A Simple Drill Vise", **Popular Mechanics** vol. 34 (November 1920), p. 3340 (checked on the archive.org scan of Popular Mechanics Shop Notes, popularmechanic00unkngoog). He gives only the bed section and the hole size and spacing; jaw and cam sizes, the bar length, how the end pieces are fixed and the cam offset are ours.

Matériaux

4

Outils requis

7

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...