SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Air Blow Gun: Press-Button Valve and Conical Air Shield
Harry Yates's air gun (US 2,604,361, 1952) for blowing chips off lathes and drills. A press-button valve is held shut by the line pressure itself; pressed, it lets air into a ribbed nozzle that splits it into a central jet and a cone of air from a ring slot, which keeps flying chips away from the worker's eyes. The rubber valve face comes out by unscrewing one cap.
The patent gives no materials (except the rubber face), threads or sizes; the machine tools named are ours. The picture: the patent's drawing.
Lanjutan
1 day
Instruksi
1
1
Bore the body
Bore the body
Bore the body's vertical opening: stem bearing (13), wider air passage (14), wider chamber (15) threaded at the bottom (16), with a valve seat rib (17) undercut round its edge. Ours: lathe and boring bar, tap for the thread.
Material untuk langkah ini:
Badan pistol tiup udara1 buahAlat yang dibutuhkan:
Mesin Bubut Logam
Batang bor dalam
Set pembuat ulir2
2
Bore the hose pocket so it breaks into the chamber
Bore the hose pocket so it breaks into the chamber
Bore and thread the hose pocket (19) so its edge cuts into the chamber, opening the port (20) and leaving a centre projection (21): an overhang that turns incoming air down into the chamber, away from the seat.
Alat yang dibutuhkan:
Mesin Bubut LogamBatang bor dalamSet pembuat ulir3
3
Bore the barrel
Bore the barrel
Bore the front barrel (11) to a cylindrical pocket (22) joined to the air passage by a tapered passage (23). Bevel the barrel's front end (44).
Alat yang dibutuhkan:
Mesin Bubut LogamBatang bor dalam4
4
Fit stem and press-button
Fit stem and press-button
Pass the valve stem (24) up through the body and press its stud (25) into the socket (27) of the press-button (28). The button slides in the bearing; the stem's flange (26) stops it coming out upward, the button head downward. Ours: arbor press.
Material untuk langkah ini:
Batang katup1 buah
Tombol tekan katup1 buahAlat yang dibutuhkan:
Pres arbor5
5
Make the valve closure
Make the valve closure
Set the rubber valve face (36) in the recess (35) on top of the closure member (30) and press a flanged tubular eyelet (37) into its centre hole (38) to hold it.
Material untuk langkah ini:
Penutup katup1 buah
Muka karet katup1 buah
Eyelet1 buahAlat yang dibutuhkan:
Pres arbor6
6
Close the chamber
Close the chamber
Slide the closure's stud (31) into the pocket (32) of the closure cap (33) and screw the cap into the chamber, a gasket (34) under its flange. The stem's pin (29) rests on the closure. Ours: flat screwdriver in the cap's slot.
Material untuk langkah ini:
Sumbat penutup1 buah
Paking perapat1 buahAlat yang dibutuhkan:
Obeng pipih7
7
Press in the nozzle
Press in the nozzle
Force the nozzle's ribs (41) into the barrel pocket (22) until its inner end stops on the tapered passage (23). That stop fixes the ring slot (45) between the nozzle's cone shoulder (42) and the barrel bevel (44).
Material untuk langkah ini:
Nosel udara1 buahAlat yang dibutuhkan:
Pres arbor8
8
Screw on the tip and the hose nipple
Screw on the tip and the hose nipple
Screw the tip (49) into the nozzle's threaded pocket (48); its bore (50) is wider than the jet hole (47) so it does not touch the jet, and it can clamp an extension tube. Screw a hose nipple into the hose pocket (19).
Material untuk langkah ini:
Ujung nosel1 buah
Nipel ulir selang1 buahAlat yang dibutuhkan:
Kunci Inggris9
9
Try the jet and the shield
Try the jet and the shield
Ours: connect an air hose from a compressor. The line pressure alone holds the valve shut. Press the button: a central jet leaves the jet hole, and a cone of air from the ring slot surrounds it.
Alat yang dibutuhkan:
Kompresor udara
Selang anginBahan
11- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
Alat yang Diperlukan
8- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.