Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
Pemula
About 3 hours
Instruksi
1
1
His list in centimetres
His list in centimetres
Memuat notebook Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3
3
Make the two bobs
Make the two bobs
Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.
Material untuk langkah ini:
Bilah tong kayu4 buah
Papan pinus1 buah
Papan Kayu Keras1 buah
Paku1 buahAlat yang dibutuhkan:
Gergaji Tangan
Palu
Pensil
Meteran Gulung4
4
Fit the bobs to the board
Fit the bobs to the board
Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.
Material untuk langkah ini:
Papan pinus1 buah
Papan Kayu Keras1 buah
Baut kepala bulat leher persegi1 buah
Ring Rata2 buah
Paku1 buahAlat yang dibutuhkan:
Bor engkol dan mata bor
Gergaji Tangan
Palu5
5
Fit the steering rope
Fit the steering rope
Fasten a rope to the knees of the front runners; it steers the sled.
Material untuk langkah ini:
Tambang kapas1 buahAlat yang dibutuhkan:
Bor engkol dan mata bor6
6
Troubleshooting
Troubleshooting
Bobsled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.
Bahan
7- 4 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 2 buahPlaceholder
- Placeholder
- 2 buahPlaceholder
- 1 buahPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


