Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)
Forge

Dibuat oleh

Forge

13. November 2026NO
3
0
0
0
0

One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)

Samuel Buchsbaum of Chicago received US 1,444,023, dated 6 February 1923, for a cuff button made in one piece. A flat blank has two oval faces joined at their edges by a tongue. The tongue is bent into a V-shaped shank with a curved middle, and the faces lean in towards each other. Pockets between the shank and the faces hold the two ends of the cuff together. There is nothing to solder and nothing to come apart. We cut it from brass sheet with a jeweller's saw, using a 1:1 template. All sizes are ours.
Pemula
About 2 hours

Instruksi

1

Where the cuff is gripped

Memuat notebook Jupyter…
2

Read US 1,444,023

"It is a purpose of the present invention to form a cuff button wherein the face members and shank portion are integral, said members being all stamped from a single sheet of material."
3

Print the template

Three blanks at 1:1 with the bend lines, and a side view of the bent button. print at 100 % (check the 50 mm bar).
Berkas desainPDFCC0 - Free
4

Cut the blank

Cut a blank out of the paper and lay it on 0.8 mm brass sheet. Scribe round it. Saw just outside the line with a jeweller's saw, then file to the line, keeping the tongue an even 4 mm wide where it meets each face.

Material untuk langkah ini:

Lembaran KuninganLembaran Kuningan1 buah

Alat yang dibutuhkan:

PenggoresPenggores
Gergaji PerhiasanGergaji Perhiasan
Set Kikir JarumSet Kikir Jarum
Ragum MejaRagum Meja
5

Smooth the edges

Round every edge with the needle files and sandpaper so nothing can catch the cuff or the skin. Do the faces' fronts now: they are hard to reach once bent.

Alat yang dibutuhkan:

Set Kikir JarumSet Kikir Jarum
AmplasAmplas
6

Bend the shank

Hold the middle of the tongue round a 3 mm rod, or in the round-nose pliers, and bend both halves up into a V about 60 degrees apart (ours). The middle stays curved, as his part 16.

Alat yang dibutuhkan:

Tang berujung bulatTang berujung bulat
Batang Baja LunakBatang Baja Lunak
7

Bend the faces

Grip each leg close to its face with the flat-nose pliers and fold the face back down outside the leg, so it hangs beside the leg and leans in a little, as in his Fig. 1. The narrow gap between leg and face is the pocket for the cuff. Check both faces sit level with each other.

Alat yang dibutuhkan:

Tang Berujung RataTang Berujung Rata
8

Polish

Polish the faces with polishing compound on a soft cloth.

Alat yang dibutuhkan:

Pasta polesPasta poles
9

Fit it to the cuff

Turn the button edgewise and pass one face through both buttonholes, turning it as it goes, as he describes. Each cuff end should sit in a pocket between a leg and its face, and the ends stay together. If it is too tight, open the faces out a little; if loose, press them in.

Alat yang dibutuhkan:

Tang Berujung RataTang Berujung Rata
10

Troubleshooting

One-piece cuff button troubleshooting.

Flow

Loading...
11

History and honest limits

**Samuel Buchsbaum** of Chicago, US 1,444,023, dated 6 February 1923, filed 22 August 1921. He claimed "a blank for cuff buttons comprising a sheet metal member having enlarged end members and a connecting tongue joining the adjacent edge portions of said end members". His were stamped; ours is sawn and filed. He also shows a form with square ends and a reinforced tongue (Figs. 5-6), not built here. He gives no sizes or metal: the brass, the 18 x 12 mm faces, the 4 x 18 mm tongue and the angles are ours.

Bahan

1

Alat yang Diperlukan

9

Berkas desain

1

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...