Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)
Tex

Dibuat oleh

Tex

3. November 2026FO
13
0
0
0
0

Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)

Dipped rubber gloves built in layers on a knitted cotton liner: one coat of natural rubber, then five coats of butyl rubber, which lets very little liquid or vapour through. Each coat is dipped from latex on a porcelain hand form, and the whole glove is cured under steam and air pressure. Made in Canada to protect soldiers against chemical warfare agents; worn gloves showed no penetration in 24 hours of field use. Result: flexible, soft chemical-resistant gloves with a comfortable cotton lining. Source: J. A. Hart and J. C. Collyer, US 4,190,685 (1980), latex method. Unknown: sizes, the pigments. Picture: the patent drawing.
Lanjutan
Unknown

Instruksi

1

Sew the cotton liner

Cut knitted or interlock cotton fabric to a glove shape and sew it into a glove. It stretches both ways, soaks up sweat and makes the glove easy to put on and take off. Not given: sizes, the knit.

Material untuk langkah ini:

Kain rajut katunKain rajut katun1 liner

Alat yang dibutuhkan:

GuntingGunting
Mesin jahitMesin jahit
Dimensi tidak diketahuiDimensi tidak diketahui
2

Dip in coagulant

Pull the liner onto a porcelain hand form and flame it to smooth off the surface. Dip it in a 10 % solution of acetic acid in acetone, then turn the form for about 2½ minutes at 24 °C until it is dry. The coagulant sets the latex before it can soak through the cloth.

Material untuk langkah ini:

Asam asetat (glasial)Asam asetat (glasial)1 10 % in acetone
AsetonAseton1 solvent

Alat yang dibutuhkan:

Cetakan sarung tanganCetakan sarung tangan
Obor PropanaObor Propana
3

Dip the natural rubber coat

Dip the liner into natural rubber latex (the patent uses LOTOL 1185) and leave it 5 seconds. Draw it out, turn it upside down and let it dry. Scrub the rubber film with an abrasive cleaner, a brush and water, and dry it again.

Material untuk langkah ini:

Lateks karet alamLateks karet alam1 bath
Pembersih abrasifPembersih abrasif1 as needed

Alat yang dibutuhkan:

Cetakan sarung tanganCetakan sarung tangan
Sikat gosokSikat gosok
4

Mix the butyl latex bath

Mix, in parts by dry weight: butyl rubber latex 100, sulphur 3, zinc dibutyldithiocarbamate 4, zinc oxide 5, formaldehyde 0.1 as a preservative, a liquid dithiocarbamate curing accelerator 4 (Merac 255 in the patent), and 6.5 of pigments (olive drab in the patent). Not given: the pigments.

Material untuk langkah ini:

Lateks karet butilLateks karet butil100 parts dry
BelerangBelerang3 parts
Seng dibutilditiokarbamatSeng dibutilditiokarbamat4 parts
Serbuk Seng OksidaSerbuk Seng Oksida5 parts
Larutan formaldehida (formalin 37 %)Larutan formaldehida (formalin 37 %)0.1 parts formaldehyde
Akselerator ditiokarbamat cairAkselerator ditiokarbamat cair4 parts
Bahan tidak diketahuiBahan tidak diketahui6.5 parts pigment

Alat yang dibutuhkan:

PengadukPengaduk
5

Dip five butyl coats

Dip the glove into the butyl latex and draw it out at 10 cm per minute. At once turn the form at about 8 rpm at 24 °C until the film has gelled, then dry it upside down in an oven at 66 °C for 1 hour. Wash, dip and dry again until there are five butyl coats; do not use the abrasive cleaner on the butyl film.

Alat yang dibutuhkan:

Cetakan sarung tanganCetakan sarung tangan
Oven pengeringanOven pengeringan
6

Cure and finish

Dry the glove at 66 °C for 1 hour. Cure it for 3 hours in a pressure vessel with 30 psi steam in the jacket (131 °C) and 26 psi air in the chamber. Strip the gloves from the forms while hot; when cool, trim them and wash them in soapy water.

Material untuk langkah ini:

SabunSabun1 as needed

Alat yang dibutuhkan:

Otoklaf mejaOtoklaf meja
GuntingGunting

Bahan

13

Alat yang Diperlukan

9

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...