Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker.
Result: a nose-and-mouth dust mask with a filter you can replace.
Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Pemula
Unknown
Instruksi
1
1
Make the guard
Make the guard
Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.
Material untuk langkah ini:
Bahan tidak diketahui1 guardAlat yang dibutuhkan:
Bor tangan
Dimensi tidak diketahui2
2
Fit the filter clips
Fit the filter clips
Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.
Material untuk langkah ini:
Kawat baja pegas1 clips
Logam tidak diketahui1 rivetsAlat yang dibutuhkan:
Tang berujung bulat
Set keling3
3
Make the head strap
Make the head strap
Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.
Material untuk langkah ini:
Tali elastis1 strap
Logam tidak diketahui1 two hooksAlat yang dibutuhkan:
Gunting
Tang berujung bulat4
4
Fit the filter and wear it
Fit the filter and wear it
Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.
Material untuk langkah ini:
Kain tidak diketahui1 filterAlat yang dibutuhkan:
GuntingBahan
5- 1 guardPlaceholder
- 1 clipsPlaceholder
- 1 two hooksPlaceholder
- 1 strapPlaceholder
- 1 filterPlaceholder
Alat yang Diperlukan
5- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Bahan cetak biru terhubung
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.




