Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
Forge

Dibuat oleh

Forge

14. November 2026NO
7
0
0
0
0

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)

How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Menengah
A few minutes per link

Instruksi

1

His rules

Memuat notebook Jupyter…
2

Read Edwinson

"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3

Cut the stock

For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).

Material untuk langkah ini:

Tongkat besi tempaTongkat besi tempa1 buah

Alat yang dibutuhkan:

Pahat panasPahat panas
Landasan TempaLandasan Tempa
PaluPalu
4

Bend and scarf

Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
Tang pandai besiTang pandai besi
5

Weld the links

Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.

Material untuk langkah ini:

PasirPasir1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
Tang pandai besiTang pandai besi
6

S-hooks for repairs

Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).

Material untuk langkah ini:

Tongkat besi tempaTongkat besi tempa1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
7

Swivel link

Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).

Material untuk langkah ini:

Tongkat besi tempaTongkat besi tempa1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
Tang pandai besiTang pandai besi
8

Troubleshooting

Chain troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.

Bahan

2

Alat yang Diperlukan

5

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...