Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Gas Washing Bottle: a Single-Neck Bottle Made into a Safety Wash-Bottle (Gattermann, 1901)
Charlie

Dibuat oleh

Charlie

3. November 2026DE
11
0
0
0
0

Gas Washing Bottle: a Single-Neck Bottle Made into a Safety Wash-Bottle (Gattermann, 1901)

A gas washing bottle that cannot suck back. A plain single-neck bottle is closed with a two-hole cork: through one hole a wide straight tube, and through it a narrow delivery tube bent at a right angle that reaches almost to the bottom; through the other the outlet. Gas bubbles up through the liquid (for example concentrated sulphuric acid to dry it). If the gas flow falters and the far vessel starts to suck, air enters between the two tubes and relieves it, so no liquid is drawn back. Result: a safety wash-bottle for washing or drying a gas stream. Source: L. Gattermann, The Practical Methods of Organic Chemistry (1901), pp. 344-345, Fig. 84. Unknown: sizes. Picture: the book's Figs. 82-85.
Pemula
Unknown

Instruksi

1

Cut and bend the tubes

Cut a straight glass tube as wide as possible to pass through the cork. Cut a narrower delivery tube, long enough to reach almost to the bottom of the bottle, and bend it at a right angle in the flame. Bend an outlet tube. Not given: bores and lengths.

Material untuk langkah ini:

Tabung kacaTabung kaca3 wide tube, delivery tube, outlet

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Pembakar BunsenPembakar Bunsen
2

Assemble and use it

Bore a cork with two holes to fit a single-neck bottle. Push the wide straight tube through one hole and the outlet through the other. Pass the delivery tube down through the wide tube so it reaches almost to the bottom of the bottle. Pour in the washing or drying liquid (for example concentrated sulphuric acid to dry hydrochloric acid gas) so the delivery tube dips in it, and pass the gas in through the delivery tube and out through the outlet. If the gas current becomes irregular and the far vessel starts to suck back, air enters between the delivery tube and the wide tube and relieves it, so no liquid is drawn back. Not given: the bottle size.

Material untuk langkah ini:

Botol kaca (bening)Botol kaca (bening)1 single-neck bottle
Sumbat gabusSumbat gabus1 two-hole

Alat yang dibutuhkan:

Pelubang gabusPelubang gabus

Bahan

3
  • 3 wide tube, delivery tube, outlet
    Placeholder
  • 1 single-neck bottle
    Placeholder
  • 1 two-hole
    Placeholder

Alat yang Diperlukan

3

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...