Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)
Woody

Dibuat oleh

Woody

13. November 2026NO
4
0
0
0
0

Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)

Roland King of Newport, Rhode Island, received US 769,350, dated 6 September 1904, for a pipe rack that holds each tobacco pipe bowl-down in an egg-shaped recess edged with soft leather, its stem resting in a notch of a raised rail behind, so moisture drains from the stem into the bowl. A classic gift for Father's Day. We make it from hardwood with calf leather edging. All sizes are ours.
Pemula
About 3 hours

Instruksi

1

Spacing

Memuat notebook Jupyter…
2

Read US 769,350

"It will be seen that my pipe-rack is of exceedingly simple construction and one which insures the pipes being supported thereon in the correct position to drain moisture from the stem into the bowl."
3

Cut and hollow the base

Cut the base A from a hardwood board to the notebook's length. Mark the egg-shaped recesses B along the front, bore each out with the brace and bit and shape it to an egg with a gouge, so a pipe bowl sits in it.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah

Alat yang dibutuhkan:

Meteran GulungMeteran Gulung
PensilPensil
Gergaji TanganGergaji Tangan
Bor engkol dan mata borBor engkol dan mata bor
Pahat LengkungPahat Lengkung
AmplasAmplas
4

Edge the recesses with leather

Cut thin strips of soft calf leather and glue them round the edge of each recess with contact cement, his cushion edging C, so the bowls are not nicked or scratched.

Material untuk langkah ini:

Kulit anak sapiKulit anak sapi1 buah
Lem KontakLem Kontak1 buah

Alat yang dibutuhkan:

Pisau KerajinanPisau Kerajinan
5

Make the stem rail

Cut the rack E from the same board and cut a notch e in its front edge opposite each recess, wide enough for a pipe stem, rounded and sanded smooth.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Gergaji CopingGergaji Coping
Kikir kasar kayuKikir kasar kayu
AmplasAmplas
6

Raise the rail

Drill the back edge of the base and the underside of the rail and glue in a row of dowel pins D, holding the rail above the rear edge of the base at the notebook's height.

Material untuk langkah ini:

Pasak kayu kerasPasak kayu keras1 buah
Lem KayuLem Kayu1 buah

Alat yang dibutuhkan:

Bor tanganBor tangan
Gergaji TanganGergaji Tangan
7

Use it

Set each pipe with its bowl in a recess and its stem in the notch above: the stem slopes down toward the bowl.
8

Troubleshooting

Pipe rack troubleshooting.

Flow

Loading...
9

History and honest limits

**Roland King** of Newport, Rhode Island, US 769,350, dated 6 September 1904, filed 12 May 1903. He claimed "a pipe-rack having a base A, in which are provided one or more egg-shaped recesses ... to receive the bowls of pipes, in combination with a stem-supporting rack E, supported above one edge of the base and provided with notches to hold the pipe-stems". He gives no sizes: the hardwood, calf, all sizes and the number of pipes are ours.

Bahan

5

Alat yang Diperlukan

10

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...