Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Dog Kennel Whose Top Tilts Back on Lift-Off Hinges to Air and Clean It (Minion, 1909)
Woody

Dibuat oleh

Woody

13. November 2026NO
6
0
0
0
0

Dog Kennel Whose Top Tilts Back on Lift-Off Hinges to Air and Clean It (Minion, 1909)

John S. Minion of Newark received US 920,975, dated 11 May 1909, for a kennel in two parts. The top half, with the roof, sits on the bottom half and hinges at the back on slotted plates and studs, so it can be tilted back to let the sun in and clean the floor, or lifted right off. A swinging arm drops down by itself to hold it open. We build it from pine. All sizes are ours.
Menengah
About 1 day

Instruksi

1

Size for the dog

Memuat notebook Jupyter…
2

Read US 920,975

"The upper portion can be tilted back as shown in Fig. 1 so as to permit the cleaning of the lower portion, and also allow sunlight to penetrate therein over its whole surface, which makes a sanitary structure."
3

Build the lower portion

Build an open box of pine boards with upright sides and a floor, his portion 10, raised on two strips 12 so air passes under it. Cut the entrance 11 in the front.

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Paku lapis sengPaku lapis seng1 buah

Alat yang dibutuhkan:

Meteran GulungMeteran Gulung
Gergaji TanganGergaji Tangan
Gergaji CopingGergaji Coping
Palu cakarPalu cakar
4

Build the upper portion

Build the top half, his portion 13, with sides that stand on the lower sides, a gabled roof 16, and an opening 15 matching the entrance. Nail strips 14 round its lower edge outside so they overlap the lower portion, shed water and make a tight joint.

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Paku lapis sengPaku lapis seng1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Gergaji CopingGergaji Coping
Palu cakarPalu cakar
5

Fit the lift-off hinge

Screw a flat-bar plate to the back of each lower side, projecting behind, with a slot cut in its top edge (his plates 32 and slots 33). Screw a plate with a bolt as a stud to each side of the upper portion so the studs drop into the slots when the top is set down (his plates 34 and studs 35). The top now tilts back on the studs or lifts off.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 buah
Baut kepala bulat leher persegiBaut kepala bulat leher persegi1 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Set KikirSet Kikir
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Set obengSet obeng
6

Fit the prop arm

Hang a flat-bar arm from a hinge at the top of the back of the upper portion (his arm 24 and hinge 23). Join its lower part to a bracket on the lower portion with a link (his link 25 and bracket 28), slotted so it can be unhooked. When the top is tilted back, the arm swings down to the ground and props it.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 buah
Engsel daunEngsel daun1 buah
Baut kepala bulat leher persegiBaut kepala bulat leher persegi1 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Set obengSet obeng
7

Protect the entrance

Screw a strip of flat bar round the edge of the entrance, his iron band 31, where a chained dog wears it.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Set obengSet obeng
8

Troubleshooting

Kennel troubleshooting.

Flow

Loading...
9

History and honest limits

**John S. Minion** of Newark, US 920,975, dated 11 May 1909, filed 21 May 1908. He claimed "a kennel comprising a bottom portion having vertical sides, a top portion with vertical sides resting on the sides of the bottom portion, hinges connecting the sides of the bottom and top portions on one end, an arm swinging from its top end on the hinged end of the top portion, and a link pivoted to the bottom portion and to the arm". He gives no sizes; the pine, all sizes and the flat-bar and bolt fittings are ours.

Bahan

6

Alat yang Diperlukan

9

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...