SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Oak Boards and Blocks, Milled and Air-Dried
The same chainsaw mill that cuts pine boards cuts oak, but oak dries slowly and checks if it dries too fast. The old rule of a year per 25 mm of thickness is close for oak. Thin boards are cut for joinery; one thick slab is kept for blocks.
Compared with pine: a slower cut, a heavier log, and a drying time measured in years, not months.
Menengah
1 day milling, 1–3 years drying
Instruksi
1
1
The milling method
The milling method
Setting up the mill and the guide board, as for pine.
2
2
Mill the boards
Mill the boards
Mill a straight oak log into boards a few millimetres over 25 mm, and one slab 80 mm thick for blocks. Oak is harder: feed slower and keep the chain sharp.
Material untuk langkah ini:
Gelondong kayu keras (ek, mapel, beech)1 buah
Sekrup kayu6 buahAlat yang dibutuhkan:
Gergaji mesin (kelas kehutanan profesional)
Rangka belah gergaji mesin
Papan pinus
Bor Tanpa Kabel
Mistar lurus
Waterpas
Helm pengaman
Penutup telinga pelindung
Sarung Tangan Kerja Kulit
Sepatu bot pengaman berujung baja3
3
Seal the ends at once
Seal the ends at once
Coat both ends of every board and the slab with wax end sealer the same day.
Material untuk langkah ini:
Penutup ujung (lilin parafin)0.5 liter4
4
Sticker in the shade
Sticker in the shade
Stack on a level base 30 cm off the ground, with 19 mm stickers every 30 cm, one above the other, in a shaded, airy place. Strong sun and wind make oak surfaces check.
Material untuk langkah ini:
Ganjal kayu (penyekat pengeringan)40 buahAlat yang dibutuhkan:
Palet kayuWaterpas5
5
Cover and weight
Cover and weight
Cover the top against rain, weight the stack, and leave the sides open.
Alat yang dibutuhkan:
Terpal6
6
How long to wait
How long to wait
Memuat notebook Jupyter…
7
7
Measure, then bring indoors
Measure, then bring indoors
Read a board from the middle of the stack each season. Air drying stops at about 12–15 %; bring the boards indoors to settle at 6–8 % before furniture work.
Alat yang dibutuhkan:
Pengukur kadar air8
8
Cut the blocks
Cut the blocks
When the slab reads dry right through a fresh cut, saw it into blocks of the lengths you need.
Alat yang dibutuhkan:
Gergaji lintang dua orang
Meteran GulungPengukur kadar air9
9
Troubleshooting
Troubleshooting
Oak drying troubleshooting.
Flow
Loading...
Bahan
4- Placeholder
- 6 buahPlaceholder
- 0.5 literPlaceholder
- Placeholder
Alat yang Diperlukan
15- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.