Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)
Woody

Dibuat oleh

Woody

14. November 2026NO
8
0
0
0
0

Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)

S. H. Samuels's ukulele from The Boy Mechanic, Book 3 (1919), made for 30 cents: a Spanish-cedar cigar box rebuilt as a 9 x 6 in body with a 2-1/2 in sound hole, an 11 in cedar or mahogany neck, a notched hardwood bridge, and aluminium frets set by the old rule of 1/18 on a 13 in string length.
Menengah
About 2 days

Instruksi

1

Fret table

Memuat notebook Jupyter…
2

Read The Boy Mechanic, Book 3

"The size of this instrument makes it especially suited to the cigar-box type of body construction."
3

Rebuild the box as the body

Take a good Spanish-cedar cigar box about 2-1/2 by 6 by 9 in, soak off the paper without marring the wood, take it apart and trim edges with too many or broken nail holes. Fit the parts so top and bottom rest against the sides and ends, the ends between the sides (Fig. 2; drawn 9 by 6 by 2-1/4 in). Cut a 2-1/2 in hole in the top 3-3/4 in from the neck end. Make corner strips A 1/4 in square and strips B 1/4 by 5/8 by 4-1/2 in for under the top and on the bottom.

Material untuk langkah ini:

Papan kayu cedarPapan kayu cedar1 buah

Alat yang dibutuhkan:

Gergaji CopingGergaji Coping
Pisau kulitPisau kulit
Ketam tanganKetam tangan
KompasKompas
PenggarisPenggaris
4

Make the neck, nut and bridge

Cut the neck from Spanish cedar or mahogany, 11 in long, best in one piece (or with the peg extension and the wide body end glued on and doweled): head 4-1/2 in, fingerboard 6-5/8 in from the 1/8 in nut, 1-1/4 in wide at the nut and 1-3/4 in at the body, heel 7/16 in, section 7/8 by 2-1/4 in as drawn (Fig. 3). Make the nut D of mahogany or walnut with the grain lengthwise, notched for the strings as spaced. Make the bridge C of hard wood, 2-1/2 in long and 1/2 in high, hollowed under the notched edge, with a metal string contact.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah
Batang Dowel KayuBatang Dowel Kayu1 buah
Lem hewaniLem hewani1 buah
Pita kuninganPita kuningan1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Gergaji CopingGergaji Coping
Pisau kulitPisau kulit
Kikir (Kikir Tangan)Kikir (Kikir Tangan)
Bor tanganBor tangan
5

Fret the fingerboard

Measure the string length from the bridge contact to the nut (13 in here). Set the first fret 1/18 of that distance from the nut, the second 1/18 of the distance from the first fret to the bridge, and so on (notebook). Cut grooves 1/8 in deep and drive in frets of aluminium (or brass) 1/16 by 3/16 in, tight enough to need no fastening.

Material untuk langkah ini:

Pita kuninganPita kuningan1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Gergaji BesiGergaji Besi
Kikir (Kikir Tangan)Kikir (Kikir Tangan)
PenggarisPenggaris
PensilPensil
PaluPalu
6

Assemble and finish

Glue the body's end to the neck with animal glue, reinforced by screws, its upper edge parallel with the fingerboard and the fingerboard flush with the top. Glue the body (without the top) to that end; when dry, glue in the strips, bridge and finally the top. Clean, sandpaper, stain and shellac or varnish. Fit tuning pegs (bought or made) and a set of strings.

Material untuk langkah ini:

Lem hewaniLem hewani1 buah
Sekrup kayuSekrup kayu1 buah
AmplasAmplas1 buah
Pernis sirlakPernis sirlak1 buah
Pasak Penyetel SenarPasak Penyetel Senar4 buah
Senar ukuleleSenar ukulele1 buah

Alat yang dibutuhkan:

Klem batangKlem batang
Obeng pipihObeng pipih
Kuas lebarKuas lebar
7

Troubleshooting

Ukulele troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Homemade Hawaiian Ukulele" by S. H. Samuels, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 358-359). He gives the box as about 2-1/2 in deep; his drawing shows 2-1/4 in. He names no stain and no string type. The fret table, its equal-temperament comparison and the metric figures are ours.

Bahan

10

Alat yang Diperlukan

14
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • 1 vendor sell this, none ship to you yet
    Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...