SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Sawn Wood Veneer: Thin Leaves Ripped from a Hardwood Board
Veneer is a thin leaf of wood glued over a core; three or more crossed layers make plywood. Before slicing and peeling machines, veneer was sawn by hand, about 3 mm thick. Plane the board face, gauge a line, rip off one leaf, and repeat, keeping the leaves in the order they came off.
The picture: our diagram of the board, the gauged line and the stack of leaves.
Menengah
A day
Instruksi
1
1
Plane the face
Plane the face
Clamp a dry hardwood board on edge and plane its face flat and smooth.
Material untuk langkah ini:
Papan Kayu Keras1 buahAlat yang dibutuhkan:
Ragum Meja
Ketam tangan
Mistar lurus2
2
Gauge the leaf
Gauge the leaf
Set the gauge to about 3 mm plus the saw kerf and scribe a line from the planed face along both edges and the end.
Alat yang dibutuhkan:
Perusut
Meteran Gulung3
3
Rip off the leaf
Rip off the leaf
Saw down the waste side of the line from both edges, keeping the cut square, until the leaf comes free.
Alat yang dibutuhkan:
Gergaji belah serat
Ragum Meja4
4
Repeat and stack
Repeat and stack
Plane the board face again and saw the next leaf. Number the leaves in order and keep them flat under boards and weights.
Alat yang dibutuhkan:
Ketam tangan
Papan kayu penekan datar (sepasang)
Beban pengepres5
5
Leaves from a board
Leaves from a board
Memuat notebook Jupyter…
Bahan
1- 1 buahPlaceholder
Alat yang Diperlukan
8- Placeholder
- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.



