SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Spiral-Slide Egg Beater: Push a Slide, Two Scrolls Turn Opposite Ways
Two beaters turning opposite ways had needed gears or a rack.
Uriah Baker of Brooklyn received US 30,453, dated 23 October 1860, for an egg beater "arranging on one spindle two egg beaters, and operating them simultaneously in opposite directions, by means of independent worms or spiral threads or grooves attached to them, and an agitatory slide, working longitudinally on the spiral threads": pins on the slide turn the inner scroll one way and the outer the other as the slide is worked up and down.
This rung works out the turns per stroke, then prints two twisted bars of opposite hand and the slide's nuts, builds the spindle and scrolls, and times a beating.
Lanjutan
About 4 hours, plus printing
Instruksi
1
1
Turns per stroke
Turns per stroke
Memuat notebook Jupyter…
2
2
Two opposite beaters from one motion before it
Two opposite beaters from one motion before it
The embedded blueprint turns two pinions opposite ways with one rack. Baker does it with two spirals of opposite hand and one slide.
3
3
Read US 30,453
Read US 30,453
"The pin G, or other equivalent device on the upper end of the reciprocating agitatory slide H, engaging into grooves formed by the spiral wires E, while the pin I, or other equivalent device on the lower end of the slide H, engaging into the spiral C, rotates the scroll D, in a direct rotatory motion. By this compound action the two scrolls cut and beat the egg to pieces with great rapidity."
4
4
Print the spirals and nuts
Print the spirals and nuts
Print the right-hand twisted bar (/uploads/blueprints/spiral-slide-egg-beater-spiral-right.stl), the left-hand one (/uploads/blueprints/spiral-slide-egg-beater-spiral-left.stl) and two square-hole nuts (/uploads/blueprints/spiral-slide-egg-beater-nut.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Material untuk langkah ini:
Filamen PETG1 buahAlat yang dibutuhkan:
Pencetak 3D filamen (FDM)5
5
Spindle and inner scroll
Spindle and inner scroll
Epoxy the right-hand bar on a 240 mm rod of 5 mm steel, 60 mm from its foot. Bend two loops of stainless wire 24 mm across onto the rod's foot: the inner scroll.
Material untuk langkah ini:
Batang Baja Lunak1 buah
Kawat baja nirkarat1 buah
Epoksi dua komponen1 buahAlat yang dibutuhkan:
Gergaji Besi
Ragum Meja
Tang berujung bulat
Tang Berujung Rata6
6
Upper spiral and outer scroll
Upper spiral and outer scroll
Slide the left-hand bar on above it, free to turn, and stop it with a collar. Hang two wires from a disk on its top down past the slide, and bend them into an outer scroll 44 mm across round the inner one.
Material untuk langkah ini:
Kawat baja nirkarat1 buahEpoksi dua komponen1 buah
Ring Rata1 buahAlat yang dibutuhkan:
Tang berujung bulatTang Berujung Rata
Jangka Sorong Digital 6 Inci7
7
The slide
The slide
Epoxy the two nuts into the ends of a 92 mm tube, one on each bar, so the tube slides along both. Fix a hardwood knob on the spindle's top.
Material untuk langkah ini:
Pasak kayu keras1 buahEpoksi dua komponen1 buahAlat yang dibutuhkan:
Kikir (Kikir Tangan)
Bor Tanpa Kabel
Set Mata Bor8
8
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the spindle with the right-hand bar fixed and the left-hand bar free, the slide with a square nut on each, the inner and outer scrolls, and the knob.
9
9
Beat egg whites
Beat egg whites
Hold the knob and work the slide up and down in a bowl of two egg whites; time to stiff peaks.
Material untuk langkah ini:
Telur2 buahAlat yang dibutuhkan:
Mangkuk aduk baja nirkarat (besar)
Stopwatch10
10
A slide that jams, scrolls that turn together
A slide that jams, scrolls that turn together
Spiral-slide egg beater troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Uriah Baker** of Brooklyn, Kings County, New York, received US 30,453, dated 23 October 1860. The lower spiral C is a permanent fixture on the spindle; the spiral E with the outer scroll F slides down onto the spindle and turns on it, kept by a shoulder; the inner scroll D is soldered to the spindle inside F; the slide is put on from the lower end and its pins inserted to engage the spirals.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed twisted bars and square nuts stand in for his spiral wires and pins. Your times are the result.
Bahan
7- 1 buahPlaceholder
- 1 buahPlaceholder
- 2 buahPlaceholder
- 3 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 2 buahPlaceholder
Alat yang Diperlukan
11- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
Berkas desain
1Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
Oblique-Rack Egg Beater: One Rack Turns Two Beaters Opposite Ways
oleh Emma
MAKANAN & MINUMAN
12
0
0
0
0
0
Counter-Rotating Egg Beater: One Wheel, Two Beaters Turning Opposite Ways
oleh Martin
MAKANAN & MINUMAN
6
0
0
0
0
0
Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways
oleh YourGrandma
MAKANAN & MINUMAN
10
0
0
0
0
0
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.