SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Strontium Ferrite Disc Magnet: 1 mol SrCO3 to 2.5 mol Iron Oxide, 1200 °C (Went, Philips 1956, Ex. 9)
A strontium ferrite: 1 mol strontium carbonate to 2.5 mol iron oxide, milled, bound and formed as in Example 4, and passed through a 1200 °C furnace in 3 to 5 minutes. Went's rod held 1,555 gauss with a coercive force of 3,160 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 9. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
Lanjutan
2 days
Instruksi
1
1
Weigh strontium carbonate and iron oxide
Weigh strontium carbonate and iron oxide
Weigh 147.6 g strontium carbonate (1 mol) and 403.4 g ferric oxide (2.5 mol).
Material untuk langkah ini:
Stronsium karbonat147.6 g
Besi(III) Oksida403.4 gAlat yang dibutuhkan:
Neraca lengan
Respirator P1002
2
Mill with alcohol 15.5 hours, dry and sieve
Mill with alcohol 15.5 hours, dry and sieve
As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.
Alat yang dibutuhkan:
Ball Mill Besi
Etanol mutu laboratorium, 95 %
Oven pengeringan
Ayakan3
3
Knead with a binder and form
Knead with a binder and form
Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.
Alat yang dibutuhkan:
Bubuk polivinil alkohol
Mesin pres hidrolik
Cetakan press cakram
Oven pengeringan4
4
Pass through a 1200 °C zone in 3 to 5 minutes
Pass through a 1200 °C zone in 3 to 5 minutes
Sinter in air at 1200 °C by passing the pieces through a 3 to 5 cm hot zone at 10 mm per minute: 3 to 5 minutes in the heat.
Alat yang dibutuhkan:
Tungku Tabung
Sarung Tangan Tahan Panas5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
Alat yang dibutuhkan:
Elektromagnet
KompasBahan
2- 147.6 gPlaceholder
- 403.4 gPlaceholder
Alat yang Diperlukan
13- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


