Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
Forge

Dibuat oleh

Forge

4. November 2026NO
11
0
0
1
0

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)

A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves. Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in. Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
Menengah
Unknown

Instruksi

1

Cut the body blank

Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.

Material untuk langkah ini:

Lembaran pelat timahLembaran pelat timah1 body
Patri timah-timbalPatri timah-timbal1 buah

Alat yang dibutuhkan:

PenggoresPenggores
Gunting sengGunting seng
PasakPasak
Palu KayuPalu Kayu
Solder ListrikSolder Listrik
FluksFluks
2

Fit the cock and strainer

Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).

Material untuk langkah ini:

Tabung kuninganTabung kuningan1 1/2 in
Keran pembuanganKeran pembuangan1 buah
Lembaran pelat timahLembaran pelat timah1 strainer
Patri timah-timbalPatri timah-timbal1 buah

Alat yang dibutuhkan:

Jangka tusukJangka tusuk
Gunting sengGunting seng
Pelubang pelat logamPelubang pelat logam
Balok Kayu KerasBalok Kayu Keras
Solder ListrikSolder Listrik
FluksFluks
3

Make the hinged lid

Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.

Material untuk langkah ini:

Lembaran pelat timahLembaran pelat timah1 lid
Kawat besiKawat besi1 1/16 in

Alat yang dibutuhkan:

Gunting sengGunting seng
PasakPasak
Palu KayuPalu Kayu

Bahan

5

Alat yang Diperlukan

9

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...