Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
Penny

Dibuat oleh

Penny

14. November 2026DK
6
0
0
0
0

Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)

A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
Pemula
An hour plus calibration

Instruksi

1

How it floats

Memuat notebook Jupyter…
2

Read the Boy Mechanic

"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3

Mount the jar

Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.

Material untuk langkah ini:

Tabung reaksiTabung reaksi1 buah
Papan Kayu KerasPapan Kayu Keras1 buah

Alat yang dibutuhkan:

Bor engkol dan mata borBor engkol dan mata bor
4

Load the float

Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.

Material untuk langkah ini:

Tabung reaksiTabung reaksi1 buah
Batangan TimbalBatangan Timbal1 buah
Gips (Plaster of Paris)Gips (Plaster of Paris)1 buah
5

Seal it

Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.

Material untuk langkah ini:

Sumbat gabusSumbat gabus1 buah
Pernis sirlakPernis sirlak1 buah
Getah PinusGetah Pinus1 buah

Alat yang dibutuhkan:

SolderSolder
6

Mark the water line

Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.

Material untuk langkah ini:

Air SulingAir Suling1 buah

Alat yang dibutuhkan:

Kikir (Kikir Tangan)Kikir (Kikir Tangan)
7

Calibrate

Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.

Material untuk langkah ini:

Air SulingAir Suling1 buah

Alat yang dibutuhkan:

Kikir (Kikir Tangan)Kikir (Kikir Tangan)
8

Troubleshooting

Hydrometer troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.

Bahan

8

Alat yang Diperlukan

3

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...