SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
YourGrandma

Dibuat oleh

YourGrandma

30. September 2026IS
14
0
0
0
0

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It

A flat squeezer presses only the middle of the lemon's cut face, and the rind at its edge keeps its juice. John Klepzig of San Francisco, California, received US 84,125, dated 17 November 1868, for "forming an opening in one of the squeezing-levers. A movable button, which is operated by a spiral spring, is placed in the opening, and, by placing the fruit between the two levers, and closing them, the juice is expressed, through the hole in the bottom, into the tumbler, while the rind of the lemon is pressed closely against the face of the button-lever, completely enclosing the button." A projection on the other lever pushes the fruit down onto the button. This rung works out the lever's force and the spring's share, with a work check, then makes the levers in hardwood with a sprung, grooved button and a hollow stem, and squeezes lemons over a tumbler.
Menengah
About 4 hours

Instruksi

1

Lever and spring

Memuat notebook Jupyter…
2

A hinged squeezer before it

The embedded blueprint squeezes the lemon between two cups on crossed handles. Klepzig uses two hinged levers and lets a sprung button give way under the fruit.
3

Read US 84,125

"A and B are the two levers, connected by a hinge, C. The lever A has a projection, D, so that when the two levers are shut together, the small end of the button E, which sets in the openings in the lever B, is forced out." "The segregated half of the fruit is placed against the spring-button, and the opposite lever, having the projection, is brought down upon the small end, which presses the rind down upon the smooth surface of the button-lever, completely surrounding the button, and bearing down the spring, which forces out the stem, while the juice of the fruit passes through the centre hole, H, into the tumbler. The face of the button is concave and has grooves centring to the opening."
4

Make the levers and squeeze lemons

**Levers.** Cut two 25 cm levers from hardwood board, shaped like Klepzig's with handles at one end, and join the other ends with a butt hinge as C. **Button seat.** Drill a 45 mm stepped hole through lever B, 7 cm from the hinge, narrower at the back to leave a ledge. **Button.** Turn or rasp a hardwood button that slides in the hole, with a concave face carved with grooves running to a centre hole, and fix a short length of tube through its centre as the stem G, passing through the narrow back of the hole. Put a compression spring round the stem, resting on the ledge. **Projection.** Glue a rounded hardwood knob to lever A opposite the button as the projection D. **Test.** Seal the wood with food-safe oil. Hold the squeezer over a tumbler, lay a half lemon cut face down on the button, close the levers and press. Weigh the juice against a half squeezed on a flat board.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah
Balok Kayu KerasBalok Kayu Keras2 buah
Engsel daunEngsel daun1 buah
Sekrup kayuSekrup kayu6 buah
Pipa aluminiumPipa aluminium0.05 meter
Aneka pegas tekanAneka pegas tekan1 buah
Lem KayuLem Kayu1 buah
LemonLemon2 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Bor Tanpa KabelBor Tanpa Kabel
Set Mata BorSet Mata Bor
Set pahat kayuSet pahat kayu
Kikir kasarKikir kasar
AmplasAmplas
Set obengSet obeng
Pisau dapurPisau dapur
Timbangan Dapur DigitalTimbangan Dapur Digital
Gelas minumGelas minum
5

A button that sticks, leaks or does not wrap the rind

Spring-button lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**John Klepzig** of San Francisco, California, received US 84,125, dated 17 November 1868. The opening in lever B was smaller at the back than at the face, leaving a ledge on which the spiral spring F rested, and the small end or tube G attached to the button passed through the lesser hole. His claim is the movable button with its opening and spiral spring, with the two levers. **Honest limits.** Hardwood levers, a carved button and a bought spring stand in for his made-up parts. The notebook ignores friction; its forces, lengths and spring are examples. Your juice weights are the result.

Bahan

8
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • 0.05 meter
    Placeholder
  • Placeholder
  • 1 buah
    Placeholder
  • 2 buah
    Placeholder

Alat yang Diperlukan

10

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...