Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Timber Beams Hewn Square from the Log
Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side.
The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Menengah
A day per beam
Instruksi
1
1
Set the log up and mark
Set the log up and mark
Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.
Material untuk langkah ini:
Gelondong kayu1 buahAlat yang dibutuhkan:
Siku-siku tetap
Benang penanda berkapur2
2
Score
Score
Stand on the log and chop notches every 30 cm or so, almost down to the line.
Alat yang dibutuhkan:
Kapak
Helm pelindung3
3
Juggle
Juggle
Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.
Alat yang dibutuhkan:
Kapak4
4
Hew to the line
Hew to the line
Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.
Alat yang dibutuhkan:
Kapak lebar5
5
Turn and repeat
Turn and repeat
Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.
Alat yang dibutuhkan:
Benang penanda berkapur
Siku-siku tetap
Beliung6
6
The biggest beam in a log
The biggest beam in a log
Memuat notebook Jupyter…
Bahan
1- 1 buahPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.



