SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides
YourGrandma

Dibuat oleh

YourGrandma

6. Oktober 2026IS
1
0
0
0
0

Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides

A plunger pushed straight down a strainer packs the potato and forces it only through the bottom. René Sebille of Baltimore received US 140,169, dated 24 June 1873, for a potato masher and strainer: a cylindrical strainer perforated all round its side and bottom, "through which the potato-mash can issue as fast as it is produced," and a plunger whose end is a wedge with two bevel faces, turned back and forth by two handles while pressed down, so it can be worked "with the least possible amount of power." This rung works out where the outlet area is, then prints the strainer and plunger and times a batch.
Pemula
About 1 hour, plus printing

Instruksi

1

Side and bottom outlets

Memuat notebook Jupyter…
2

A tube and plunger before it

The embedded blueprint pushes a flat plunger down a tube. Sebille perforates the sides too and turns a wedge instead of pushing.
3

Read US 140,169

"The plunger is then rotated back and forth by means of the handles D D, at the same time that a certain amount of pressure is exerted downward upon it. By this motion the bevel faces c c of the plunger displace and mash the potatoes, and force them through the openings a of the strainer, the peculiar double-bevel-faced shape of the plunger making it easy to accomplish the desideratum with the smallest amount of power, and yet very expeditiously."
4

Print the strainer and plunger

Print the perforated strainer with its handles (/uploads/blueprints/wedge-plunger-potato-strainer-strainer.stl) and the plunger with its wedge end and cross handle (/uploads/blueprints/wedge-plunger-potato-strainer-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Material untuk langkah ini:

Filamen PETGFilamen PETG1 buah

Alat yang dibutuhkan:

Pencetak 3D filamen (FDM)Pencetak 3D filamen (FDM)
5

The build in 3D

FreeCAD model of this build, not of the patent: the 80 mm strainer with 288 side holes and a bottom grid of 4 mm holes and two handles, and the plunger with its double-bevel wedge and cross handle.
Berkas desainBLENDCC0 - Free
6

Cook the potatoes

Boil 500 g of potatoes, peeled and quartered, for about 20 minutes until a knife slides in; drain.

Material untuk langkah ini:

KentangKentang1 buah
AirAir1 buah

Alat yang dibutuhkan:

Panci berdinding tinggiPanci berdinding tinggi
Timbangan Dapur DigitalTimbangan Dapur Digital
7

Turn and press

Stand the strainer in a bowl, fill it with hot potato, and turn the plunger to and fro with light pressure. Time the batch; then repeat pushing straight down only.
Langkah 7 - Image 1

Alat yang dibutuhkan:

Mangkuk aduk baja nirkarat (besar)Mangkuk aduk baja nirkarat (besar)
StopwatchStopwatch
8

A plunger that jams, a strainer that clogs

Wedge-plunger potato strainer troubleshooting.

Flow

Loading...
9

History and honest limits

**René Sebille** of Baltimore filed US 140,169 on 5 May 1873; it is dated 24 June 1873. The strainer can be held by its handles, given legs to stand over a dish, or fastened to a table; the plunger is cylindrical for most of its length to bear on the sides, though the wedge end with a short cylinder may be fixed to a long handle. He claimed the double-bevel plunger with the strainer. **Honest limits.** A printed strainer stands in for his tin one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.

Bahan

3
  • Placeholder
  • 1 buah
    Placeholder
  • 1 buah
    Placeholder

Alat yang Diperlukan

5

Berkas desain

1

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...