सहयोग
कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Great Bellows of the Smelting Works: Pine Boards, Linden Bows, Ox-Hide and Iron Nozzle (Agricola, 1556)
Forge

द्वारा बनाया गया

Forge

14. नवंबर 2026NO
10
0
0
0
0

Great Bellows of the Smelting Works: Pine Boards, Linden Bows, Ox-Hide and Iron Nozzle (Agricola, 1556)

The large blast bellows of a 16th-century smelting works, every part measured, from Agricola's De Re Metallica, Book IX (1556): two tapered boards of glued pine edged with linden, about 1.7 m long, two linden bows, two ox-hides nailed on with T-headed nails, a goatskin flap valve in the lower board, and a glued head carrying a 3 ft iron nozzle.
उन्नत
About 2 weeks

निर्देश

1

Roman units in metric

Jupyter नोटबुक लोड हो रही है…
2

Read De Re Metallica, Book IX

"Each bellows consists of a body and a head. The body is composed of two 'boards', two bows, and two hides."
3

Make the upper board

Glue two pieces of pine into a board a palm thick, 5 ft 3 palms long, 2-1/2 ft wide at the back (sides a little curved) and a cubit wide at the front, tapering to the head. Glue on linden edge strips, 7 digits wide at the back and 1-1/2 at the front, to take the nails. Cut an aperture 6 by 4 digits in the middle, 1 ft 3 palms from the head, with a sliding lid 2 palms 1 digit square and 3 digits thick running in mouldings a palm wide and 3 digits thick (or bore 2-3 round holes with plugs). Glue and peg a handle 7 palms or longer (2 palms wide, 1 thick on the board; rounded and 7 digits thick beyond), with a 2 ft cleat 2 palms wide and a palm thick over it and another 2 ft cleat underneath, 3 palms from the end.

इस चरण के लिए सामग्री:

चीड़ का पटराचीड़ का पटरा2 टुकड़े
बासवुड की चादरबासवुड की चादर1 टुकड़ा
खाल का सरेसखाल का सरेस1 टुकड़ा
लकड़ी की डॉवेल छड़लकड़ी की डॉवेल छड़1 टुकड़ा

आवश्यक उपकरण:

हस्त आरीहस्त आरी
रंदारंदा
रुखानियाँरुखानियाँ
हत्थेदार बरमा और फलहत्थेदार बरमा और फल
पट्टीदार क्लैंपपट्टीदार क्लैंप
4

Make the lower board and flap valve

Make the lower board the same way and a cubit longer (the extra length is part of the head). About a cubit from the back, centred, cut an air-hole a foot long and 3 palms wide, leaving a rib a palm long and 1/3 digit wide across it. Make the flap a foot 3 digits by 3 palms 3 digits of thin board covered with goatskin, hair toward the ground, hinged with a doubled strip of leather a palm wide nailed to it and tied through two holes 7 digits apart. A foot beyond, fix a slightly elliptical iron ring 2 palms by 1 on a staple, 3 palms from the back, for the wooden bolt that holds the board to its frame (or use two iron screws).

इस चरण के लिए सामग्री:

चीड़ का पटराचीड़ का पटरा2 टुकड़े
बासवुड की चादरबासवुड की चादर1 टुकड़ा
खाल का सरेसखाल का सरेस1 टुकड़ा
बकरी की कच्ची खालबकरी की कच्ची खाल1 टुकड़ा
चमड़े की बेल्टचमड़े की बेल्ट1 टुकड़ा
धातु का छल्लाधातु का छल्ला1 टुकड़ा
कीलेंकीलें1 टुकड़ा

आवश्यक उपकरण:

हस्त आरीहस्त आरी
रुखानियाँरुखानियाँ
हत्थेदार बरमा और फलहत्थेदार बरमा और फल
हथौड़ाहथौड़ा
5

Make the bows

Make each bow as long as the upper board from four pieces of linden 3 digits thick: two long pieces 7 digits wide at the back and 2-1/2 at the front, a back piece 2 palms wide, its ends a little over a digit thick, bent to meet the long pieces, mortised, bored and pegged with glued pegs. Mortise in a crossbar a cubit from the head, a foot long without tenons and a palm 2 digits wide. Glue and peg two small pieces, 3 palms 2 digits long, a palm high and a digit thick, at the head to keep the bow ends off the air passage.

इस चरण के लिए सामग्री:

बासवुड की चादरबासवुड की चादर2 टुकड़े
खाल का सरेसखाल का सरेस1 टुकड़ा
लकड़ी की डॉवेल छड़लकड़ी की डॉवेल छड़1 टुकड़ा

आवश्यक उपकरण:

हस्त आरीहस्त आरी
रुखानियाँरुखानियाँ
हत्थेदार बरमा और फलहत्थेदार बरमा और फल
लकड़ी का मुँगरालकड़ी का मुँगरा
6

Make the head and nozzle

Glue the upper head board, a cubit long and 1-1/2 palms thick, onto the lower board's extension (a palm and a digit thick). Shape it a cubit wide at the back, 2 digits narrower 3 palms forward, then round the front to 2 palms 2 digits across and bind it with an iron ring 3 digits wide. Bore it for the nozzle: a pipe of thin iron plate 3 ft long, 3 digits across in front and a palm high by 2 palms wide at the back.

इस चरण के लिए सामग्री:

चीड़ का पटराचीड़ का पटरा1 टुकड़ा
खाल का सरेसखाल का सरेस1 टुकड़ा
लोहे की चादर (हथौड़े से गढ़ी)लोहे की चादर (हथौड़े से गढ़ी)1 टुकड़ा
धातु का छल्लाधातु का छल्ला1 टुकड़ा

आवश्यक उपकरण:

हस्त आरीहस्त आरी
हत्थेदार बरमा और फलहत्थेदार बरमा और फल
भट्ठी (गढ़ाई की)भट्ठी (गढ़ाई की)
निहाईनिहाई
हथौड़ाहथौड़ा
7

Hide the bellows

Use ox-hide (far better than horse), two hides each 3-1/2 ft wide at the back. Lay a long leather thong along each board and bow and nail the hide through it with T-shaped iron nails 5 digits long, horns 2-1/2 digits long and half a digit wide, the horn of one nail almost touching the next along the boards; on each bow two nails in the back piece and four in each long piece, ten in all. Pine strips nailed over the hide on the long pieces guard against tearing; iron screws through strips over the hide hold even better.

इस चरण के लिए सामग्री:

वानस्पतिक विधि से पकाया चमड़ावानस्पतिक विधि से पकाया चमड़ा2 टुकड़े
चमड़े की बेल्टचमड़े की बेल्ट1 टुकड़ा
कीलेंकीलें1 टुकड़ा

आवश्यक उपकरण:

हथौड़ाहथौड़ा
चमड़ा काटने की छुरीचमड़ा काटने की छुरी
कैंचीकैंची
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Georgius Agricola, **De Re Metallica** (1556), Book IX, translated by Herbert C. and Lou H. Hoover, 1912 (checked on the archive.org scan georgiusagricola00agri, pp. 362-365). The frame and the machinery that work the bellows are not covered here. The metric conversions (digit ~1.85 cm, palm ~7.4 cm, Roman foot ~29.6 cm, cubit ~44.4 cm) and the tools are ours.

सामग्री

10

आवश्यक उपकरण

11

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...