कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Cyanoacrylate Adhesive
Woody

द्वारा बनाया गया

Woody

22. सितंबर 2026NO
31
0
0
0
0

Cyanoacrylate Adhesive

Harry Coover first met cyanoacrylates in 1942 while looking for a clear plastic for gun sights, and rejected them because they stuck to everything. In 1951 at Eastman Kodak he and Fred Joyner met them again - and this time saw a glue that set in seconds with no heat or pressure. It was sold from 1958. **US 2,794,788**, "Adhesive compositions containing alkyl esters of cyanoacrylic acid", Coover and Shearer, Eastman Kodak, filed 1. November 1952, granted 4. June 1957, claims the monomeric alkyl α-cyanoacrylate adhesive. **US 2,768,109**, "Alcohol-catalyzed alpha-cyanoacrylate adhesive compositions", Coover, filed 2. June 1954, granted 23. October 1956, claims "strongly bonding wood having an acidic surface character" by first moistening it with an alcohol of 1 to 8 carbon atoms. **You test that second claim on oak**, an acidic wood: dry, wiped with isopropyl alcohol, and misted with water.
शुरुआती
1 hour plus 24 h

निर्देश

1

Cut the strips

Saw eighteen oak strips 80 x 20 mm, about 5 mm thick. Sand one end face of each with 180 grit and dust off. Pencil-mark three groups: dry, IPA, water.

इस चरण के लिए सामग्री:

श्वेत बलूत का तख़्ताश्वेत बलूत का तख़्ता1 टुकड़ा
रेगमालरेगमाल1 शीट

आवश्यक उपकरण:

हस्त आरीहस्त आरी
2

Prepare the surfaces

Leave the first group dry. Wipe the ends of the second with isopropyl alcohol on a towel and use them within a minute. Give the third one light mist of water and blot. Note the room humidity.

इस चरण के लिए सामग्री:

आइसोप्रोपिल ऐल्कोहॉल 99 %आइसोप्रोपिल ऐल्कोहॉल 99 %10 मिली
कागज़ी तौलियाकागज़ी तौलिया2 शीट

आवश्यक उपकरण:

पानी की फुहार बोतलपानी की फुहार बोतल
आर्द्रतामापीआर्द्रतामापी
3

Glue and time

Gloves and glasses on. One drop of CA on one end, overlap a partner strip by 20 mm, press 5 seconds and start the stopwatch. Every 10 seconds hang the spring scale from the free strip and pull to 2 N: record when it first holds. Three joints per group.

इस चरण के लिए सामग्री:

तात्क्षणिक गोंद (सायनोऐक्रिलेट)तात्क्षणिक गोंद (सायनोऐक्रिलेट)1 टुकड़ा

आवश्यक उपकरण:

स्टॉपवॉचस्टॉपवॉच
बल-मापी (स्प्रिंग तुला)बल-मापी (स्प्रिंग तुला)
नाइट्राइल दस्तानेनाइट्राइल दस्ताने
पारदर्शी सुरक्षा चश्मापारदर्शी सुरक्षा चश्मा
4

Break them tomorrow

After 24 hours clamp one strip of each joint in the vise and tap the free end sideways with the mallet until it breaks. Estimate how much of the bond area is torn wood.

आवश्यक उपकरण:

बेंच शिकंजाबेंच शिकंजा
रबर का हथौड़ारबर का हथौड़ा
पारदर्शी सुरक्षा चश्मापारदर्शी सुरक्षा चश्मा
5

Set times and joints

Jupyter नोटबुक लोड हो रही है…
6

History & Context

**What the patents specify:** a monomeric alkyl α-cyanoacrylate adhesive held liquid by an acid inhibitor, and, for acidic surfaces, a prior wipe with a C1–C8 alcohol. **Modern build (derived):** hardware-store CA glue on oak. CA spread from industry to every workshop, and in the Vietnam War medics used a CA spray to seal wounds; purpose-made medical grades followed. Its limits: brittle joints that fail in peel and impact, poor gap filling, and it bonds skin instantly - acetone releases it.
चरण 6 - Image 1

सामग्री

5

आवश्यक उपकरण

9

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...