कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Machete to a Relief Specification
Forge

द्वारा बनाया गया

Forge

11. अक्टूबर 2026NO
2
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
उन्नत
Factory process

निर्देश

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

इस चरण के लिए सामग्री:

कार्बन इस्पात की छड़ (0.6 % C)कार्बन इस्पात की छड़ (0.6 % C)1 टुकड़ा

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
उठाकर गिराने वाला घनउठाकर गिराने वाला घन
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
रॉकवेल कठोरता परीक्षकरॉकवेल कठोरता परीक्षक
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

इस चरण के लिए सामग्री:

हत्थे के लिए कठोर लकड़ी का टुकड़ाहत्थे के लिए कठोर लकड़ी का टुकड़ा1 टुकड़ा
इस्पात की रिवेटइस्पात की रिवेट3 टुकड़े
इस्पात के वॉशरइस्पात के वॉशर3 टुकड़े
4

Check

Check the edge for dents and the hardness near the edge.

आवश्यक उपकरण:

रॉकवेल कठोरता परीक्षकरॉकवेल कठोरता परीक्षक

सामग्री

4

आवश्यक उपकरण

3

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...