कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य

Leave-In Probe Thermometer: Stainless Probe on a Flexible Lead to a Programmable Timer (Chapman, US 6,568,848, 2003)
A meat thermometer you leave in the roast. A pointed stainless steel probe stays in the meat. A flexible lead runs out of the oven to a battery timer unit with a display, keys and a beeper. You pick the meat and how well done you want it; the unit shows the temperature and the time left, and beeps when it is done.
Result: continuous reading of the inside of the meat without opening the oven.
Source: P. A. Chapman and C.-A. Chang (Maverick Industries), US 6,568,848 (2003). The patent's main form sends the readings by radio; it also states this wired form. Unknown: the sensor, the circuit, the target temperatures and the materials. Picture: the patent drawing.
मध्यवर्ती
Unknown
निर्देश
1
1
Make the probe
Make the probe
Make the probe of a rigid material such as stainless steel. It has a pointed end that goes into the meat, a straight section from the point, then a curved section to the other end. The temperature sensor sits inside. Not given: the type of sensor, sizes.
इस चरण के लिए सामग्री:
नुकीले डाट वाली थर्मामीटर नली1 stainless steel
तापमान संवेदक1 टुकड़ाआवश्यक उपकरण:
अज्ञात माप
टाँका लगाने की छड़2
2
Fit the flexible lead and plug
Fit the flexible lead and plug
Join a flexible lead to the curved end of the probe, so the probe can lie at any angle to the unit. Put a plug with a male end on the other end of the lead. Not given: the lead material, the plug type, the length.
इस चरण के लिए सामग्री:
बहु-चालक केबल1 flexible lead
अज्ञात कनेक्टर1 plug
सोल्डर तार1 as neededआवश्यक उपकरण:
टाँका लगाने की छड़
अज्ञात माप3
3
Build the timer unit
Build the timer unit
In a hand-held case, fit a microprocessor that runs the cooking programs, a liquid crystal display, a beeper and batteries. Fit nine keys: clock or timer, probe A or B, meat type, doneness, two to set and change the final temperature, hours, minutes, and start/stop. Add a jack for each probe, a stand to set it upright and a clip for a belt or pocket. Not given: the circuit, the program, the case material.
इस चरण के लिए सामग्री:
मुद्रित परिपथ बोर्ड1 टुकड़ा
इंटीग्रेटेड सर्किट (IC)1 microprocessor
सेगमेंट एलसीडी पैनल1 टुकड़ा
दाब बटन9 keys
पीज़ो बज़र1 टुकड़ा
अज्ञात कनेक्टर2 probe jacks
बैटरी1 as needed
अज्ञात सामग्री1 case, stand, clip
सोल्डर तार1 as neededआवश्यक उपकरण:
टाँका लगाने की छड़
पेचकस सेट4
4
Roast with it
Roast with it
Plug the probe into the timer unit. Pick the meat (beef, veal, lamb, pork, chicken, turkey) and the doneness (rare, medium rare, medium, well-done); the patent cooks to USDA guidelines. Push the probe into the meat, put it in the oven and lead the cable out to the unit, then press start. The display shows the meat, the doneness, the temperature (°F or °C) and the time left, and the beeper sounds at the right moments. A second probe watches a second piece. Not given: the temperature for each doneness.
आवश्यक उपकरण:
ओवनसामग्री
12- 1 stainless steelप्लेसहोल्डर
- प्लेसहोल्डर
- 1 flexible leadप्लेसहोल्डर
- 2 probe jacksप्लेसहोल्डर
- 2 as neededप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 microprocessorप्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- प्लेसहोल्डर
- 1 टुकड़ाप्लेसहोल्डर
- 1 as neededप्लेसहोल्डर
- 1 case, stand, clipप्लेसहोल्डर
कनेक्टेड ब्लूप्रिंट सामग्री
यह ब्लूप्रिंट बनाता है
संबंधित ब्लूप्रिंट
ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत
CC0 पब्लिक डोमेन
यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।
उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।




