कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Tin Bronze Ingots, Wire and Rod
Forge

द्वारा बनाया गया

Forge

11. अक्टूबर 2026NO
5
0
0
0
0

Tin Bronze Ingots, Wire and Rod

Bronze is copper alloyed with tin. Bronze Age smiths used about 10 % tin for castings and a softer 'mild' bronze of about 6 % tin that they hammered into sheet; modern bronze is about 88 % copper and 12 % tin. It melts at about 950 °C, depending on the mix. Melt the copper, stir in the tin, pour ingots; for wire and rod, use the 6 % alloy and draw it like copper, annealing often.
मध्यवर्ती
A day

निर्देश

1

Weigh the charge

Jupyter नोटबुक लोड हो रही है…
2

Melt the copper

Melt the weighed copper in a crucible in the charcoal forge with the air on, under a layer of charcoal to keep the air off the metal.

इस चरण के लिए सामग्री:

तांबे की सिल्लीतांबे की सिल्ली940 ग्रा
लकड़ी का कोयलालकड़ी का कोयला10 किलो

आवश्यक उपकरण:

लोहार की भट्ठीलोहार की भट्ठी
अग्निसह मिट्टी की घरियाअग्निसह मिट्टी की घरिया
तौल का काँटातौल का काँटा
चमड़े का एप्रनचमड़े का एप्रन
वेल्डिंग के दस्तानेवेल्डिंग के दस्ताने
सुरक्षा चश्मासुरक्षा चश्मा
3

Add the tin

Push the weighed tin under the melt with a dry iron rod and stir it in.

इस चरण के लिए सामग्री:

राँगे की सिल्लीराँगे की सिल्ली60 ग्रा

आवश्यक उपकरण:

क्रूसिबल चिमटाक्रूसिबल चिमटा
4

Pour ingots

Lift the crucible with the tongs and pour into a warmed, dry ingot mould. Let it cool.

आवश्यक उपकरण:

क्रूसिबल चिमटाक्रूसिबल चिमटा
पिंड का साँचापिंड का साँचा
5

Hammer and draw

Anneal a 6 % ingot at a dull red and quench, hammer it round, taper the end, and draw it through the drawplate with wax, annealing every two holes. Stop at rod or go on to wire.

इस चरण के लिए सामग्री:

मोममोम10 ग्रा
जलजल5 लीटर

आवश्यक उपकरण:

निहाईनिहाई
गोल सिरे वाला हथौड़ागोल सिरे वाला हथौड़ा
प्रोपेन टॉर्चप्रोपेन टॉर्च
अग्निसह ईंटअग्निसह ईंट
लोहार की संड़सीलोहार की संड़सी
पानी चढ़ाने की बाल्टीपानी चढ़ाने की बाल्टी
रेती सेटरेती सेट
इस्पात की तारखींच पट्टीइस्पात की तारखींच पट्टी
खींचने का संडासीखींचने का संडासी
बेंच शिकंजाबेंच शिकंजा
6

Measure

Measure the rod or wire and label it with its tin percentage.

आवश्यक उपकरण:

डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
7

Troubleshooting

Bronze troubleshooting.

Flow

Loading...

सामग्री

5
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • 10 ग्रा
    प्लेसहोल्डर
  • 5 लीटर
    प्लेसहोल्डर

आवश्यक उपकरण

19

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...