همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Coasting Toboggan: Four Steamed Hardwood Boards Bent Over a Log Form (Boy Mechanic, 1919)
Woody

ایجاد شده توسط

Woody

13. نوامبر 2026NO
۱۲
۰
۰
۰
۰

Coasting Toboggan: Four Steamed Hardwood Boards Bent Over a Log Form (Boy Mechanic, 1919)

A. M. Parker's toboggan from The Boy Mechanic, Book 3 (1919), 7-1/2 ft long and 16 in wide: four 5/16 in hardwood boards steamed at one end and bent round a 12 in log on a simple form, held by notched cross cleats, the curl riveted and wired, and a rope run along the sides.
متوسط
About 1 week (four days drying)

دستورالعمل‌ها

1

His mill bill in centimetres

در حال بارگذاری دفترچهٔ Jupyter…
2

Read The Boy Mechanic, Book 3

"Essentials of a good toboggan, whether for coasting or use in transportation, are strength and lightness." Woods in order of merit: hickory, birch and oak (not quarter-sawed).
3

Prepare the boards and cleats

Choose four 5/16 by 4 in by 10 ft boards straight in grain and free from knots. Plane the running side and bevel the edges so that, together, they form a wide V joint half the depth of the boards. Notch the seven 1 by 1 in cross cleats on one side, 1 in from each end, for the side ropes.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت4 قطعه

ابزارهای مورد نیاز:

رندهٔ دستیرندهٔ دستی
ارهٔ دستیارهٔ دستی
اسکنه‌هااسکنه‌ها
مدادمداد
متر نواریمتر نواری
4

Build the bending form

Bore a gimlet hole through the centre of each 1 by 2 by 18 in piece and two more 4-1/4 in each side of it. Nail one 6 ft common board to each end of the 12 in by 18 in log block so their ends run parallel. With 3 in nails fix one bored cleat to the block between them, held out 1/2 in by a temporary spacer.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج2 قطعه
میخمیخ1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل دستیدریل دستی
چکشچکش
5

Steam and bend

Steam about 3 ft of the board ends, or boil them in a tank. Clamp or nail the dry ends together edge to edge between two of the 1 by 2 in pieces, about 1/4 in apart. Push the steamed ends under the cleat on the block (its nails slip between the boards), bear down and nail on another bored cleat as far as the floor allows. Turn it over and bend the boards round the block, nailing on more cleats, until the clamped end lies between the 6 ft boards; hold it with a piece nailed across. The closer the cleats, the less risk of splitting.

مواد مورد نیاز این مرحله:

میخمیخ1 قطعه

ابزارهای مورد نیاز:

دیگ بزرگدیگ بزرگ
چکشچکش
گیرهٔ میله‌ایگیرهٔ میله‌ای
6

Fit the cleats and finish

Dry at least four days on the form. Clamp the two 1/2 by 1 in pieces on each side of the bow ends, drill through and rivet them. Rivet a 1 by 1 in crossbar inside the bow at the extreme front and another under the end of the curl, and wire them together to hold the bend. Put the tail crossbar not nearer than 2-1/2 in from the board ends and space the rest evenly, notched side down. Trim, scrape and sandpaper the bottom, finish with oil, and run a 3/8 in rope through the notches under the cleat ends.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
پرچ فولادیپرچ فولادی1 قطعه
سیم آهنیسیم آهنی1 قطعه
روغن بزرکروغن بزرک1 قطعه
کاغذ سنبادهکاغذ سنباده1 قطعه
طناب پنبه‌ایطناب پنبه‌ای1 قطعه

ابزارهای مورد نیاز:

دریل دستیدریل دستی
چکشچکش
ارهٔ دستیارهٔ دستی
کاردک فولادیکاردک فولادی
انبردست تختانبردست تخت
7

Troubleshooting

Toboggan troubleshooting.

Flow

Loading...
8

History and honest limits

From "Making a Coasting Toboggan" by A. M. Parker, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 11-13). The tools and metric figures are ours.

مواد

8
  • جایگزین
  • جایگزین
  • 2 قطعه
    جایگزین
  • جایگزین
  • 1 قطعه
    جایگزین
  • جایگزین
  • جایگزین
  • جایگزین

ابزارهای لازم

11
  • جایگزین
  • جایگزین
  • جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...