همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Ice Glider: Three-Skate Push Scooter With a Steering Crosspiece and Spiked Pusher (Boy Mechanic, 1915)
Woody

ایجاد شده توسط

Woody

13. نوامبر 2026NO
۸
۰
۰
۰
۰

Ice Glider: Three-Skate Push Scooter With a Steering Crosspiece and Spiked Pusher (Boy Mechanic, 1915)

Mildred E. Thomas's ice glider from The Boy Mechanic, Book 2 (1915), "similar to an ice yacht, only a great deal smaller": a 40 in rear board on one skate, bolted to a 30 in front crosspiece on two skates tilted about 30 deg, with a 26 in upright and a handle to steer. It is pushed along with a spiked block strapped to one shoe.
مبتدی
About 1 day

دستورالعمل‌ها

1

Her sizes, and the skate angle

در حال بارگذاری دفترچهٔ Jupyter…
2

Read The Boy Mechanic, Book 2

"The enthusiastic pushmobilist need not put aside his hobby during the winter, as an amusement device for use on ice, which will surpass the very best pushmobile, can be easily made as shown in the illustration."
3

Make the front crosspiece

Cut the front crosspiece 30 in long and about 8 in wide, with its front and back edges cut on a slant. Fasten a tapering block to each end so that the skates on them stand at an angle of about 30 deg, edges outward, and fix a skate to each block with screws through holes drilled in the top plates (or with straps).

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه
تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
اسکیت روی یخاسکیت روی یخ2 قطعه
پیچ چوبپیچ چوب1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
رندهٔ دستیرندهٔ دستی
نقالهنقاله
دریل دستیدریل دستی
مدادمداد
متر نواریمتر نواری
4

Build the upright and handle

In the centre of the crosspiece build an upright 26 in high: nail a piece to its front and back edges so that, on the slanted edges, they stand sloping toward the rear. Fasten a handle 24 in long between the two uprights at the top.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه
تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
میخمیخ1 قطعه
پیچ چوبپیچ چوب1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
چکشچکش
دریل دستیدریل دستی
5

Make the rear board and join it

Cut the rear board 8 in wide and 40 in long and fasten the third skate in a perfectly straight position on its rear end. Bore a hole in the front end of the board and bolt it to the centre of the front crosspiece, so the crosspiece turns to guide the glider.

مواد مورد نیاز این مرحله:

تختهٔ کاجتختهٔ کاج1 قطعه
اسکیت روی یخاسکیت روی یخ1 قطعه
پیچ سرگرد گردن‌چهارگوشپیچ سرگرد گردن‌چهارگوش1 قطعه
واشر تختواشر تخت2 قطعه
پیچ چوبپیچ چوب1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
دریل دستهٔ گردان با متهدریل دستهٔ گردان با مته
دریل دستیدریل دستی
6

Make the pusher

Drive nails through a block of wood so their points project on the underside, and strap the block to one shoe. Or use sole leather instead of the block, with small slots cut in the sides for the straps and nails driven through so the points project. Push the glider along like a pushmobile.

مواد مورد نیاز این مرحله:

تختهٔ چوب سختتختهٔ چوب سخت1 قطعه
میخمیخ1 قطعه
بند چرمیبند چرمی1 قطعه

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
چکشچکش
7

Troubleshooting

Ice glider troubleshooting.

Flow

Loading...
8

History and honest limits

From "An Ice Glider" by Mildred E. Thomas, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, pp. 31-32). She gives no board thicknesses, bolt size or block taper, only the 30 deg skate angle. The tools and metric figures are ours.

مواد

8

ابزارهای لازم

8
  • جایگزین
  • جایگزین
  • جایگزین
  • جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • 1 vendor sell this, none ship to you yet
    جایگزین
  • جایگزین
  • جایگزین

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...