هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Closed-Globe Egg Beater: Concentric Rings in a Shut Sphere
Martin

ایجاد شده توسط

Martin

6. اکتبر 2026NO
۷
۰
۰
۰
۰

Closed-Globe Egg Beater: Concentric Rings in a Shut Sphere

Beaten in an open bowl, egg spatters and the air is not forced into it. James M. Jay of Canton, Ohio, received US 27,054, dated 7 February 1860, for an egg beater whose case is a hollow globe of two halves hinged and caught together; a horizontal shaft through it carries concentric rings, the outer one close to the inside so it sweeps the bottom, turned by a wheel and gear on a stand. "The air which occupies the upper part ... is so closely confined that it can not escape during the operation of beating the eggs, consequently it is carried down and mixed thoroughly with the eggs." This rung works out the air-to-egg ratio, then prints the ring dasher and gears, closes it in two bowls, and times a beating.
متوسط
About 5 hours, plus printing

دستورالعمل‌ها

1

Air shut in with the eggs

در حال بارگذاری دفترچهٔ Jupyter…
2

A dasher in a closed box before it

The embedded blueprint spins a dasher in a square box. Jay shuts the eggs in a globe so the air is driven into them.
3

Read US 27,054

"In my egg beater the air which occupies the upper part of the hollow bottom B, together with that which fills the cover or cap C, is so closely confined that it can not escape during the operation of beating the eggs, consequently it is carried down and mixed thoroughly with the eggs by the rings or dashes H', while the eggs are carried up and through the air in the cap or case C, so that a perfect mixture of the air and eggs is effected."
4

Print the rings and gears

Print the concentric-ring dasher (/uploads/blueprints/closed-globe-egg-beater-rings.stl), the 36-tooth wheel (/uploads/blueprints/closed-globe-egg-beater-wheel-36.stl) and the 12-tooth gear (/uploads/blueprints/closed-globe-egg-beater-gear-12.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

مواد مورد نیاز این مرحله:

فیلامنت PETGفیلامنت PETG1 قطعه

ابزارهای مورد نیاز:

چاپگر سه‌بعدی رشته‌ای (FDM)چاپگر سه‌بعدی رشته‌ای (FDM)
5

Make the globe

Take two matching bowls 120 mm across from the set. Drill both rims at opposite points for the shaft, 5.5 mm, so the shaft lies on the joint.

مواد مورد نیاز این مرحله:

مجموعهٔ کاسهٔ مخلوط‌کنمجموعهٔ کاسهٔ مخلوط‌کن1 قطعه

ابزارهای مورد نیاز:

دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
کولیس دیجیتال ۶ اینچیکولیس دیجیتال ۶ اینچی
6

Shaft, rings and stand

Pass a 5 mm rod through one bowl's holes and the dasher's hub, and epoxy the hub at the centre. Epoxy the 12-tooth gear on the rod outside. Mount the 36-tooth wheel with a crank on an M5 screw on a hardwood upright so it meshes, and stand the lower bowl in a plywood ring.

مواد مورد نیاز این مرحله:

میلگرد فولاد نرممیلگرد فولاد نرم1 قطعه
اپوکسی دوجزئیاپوکسی دوجزئی1 قطعه
قطعهٔ چوب سختقطعهٔ چوب سخت1 قطعه
ورق تخته‌سه‌لاورق تخته‌سه‌لا1 قطعه
پیچ‌های ماشینیپیچ‌های ماشینی1 قطعه
واشر تختواشر تخت1 قطعه
مهرهٔ شش‌گوشمهرهٔ شش‌گوش1 قطعه
پیچ چوب #8 در ۱ اینچپیچ چوب #8 در ۱ اینچ1 قطعه

ابزارهای مورد نیاز:

ارهٔ آهن‌برارهٔ آهن‌بر
ارهٔ موییارهٔ مویی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
آچار فرانسهآچار فرانسه
مجموعه پیچ‌گوشتیمجموعه پیچ‌گوشتی
7

The patent drawing

US 27,054 drawing sheet, public domain (expired patent).
مرحله 7 - Image 1
8

Closed against open

Beat two egg whites with the top bowl clamped on and time them to stiff peaks; then again with the top off. Compare the times and the volume of foam.
مرحله 8 - Image 1

مواد مورد نیاز این مرحله:

تخم‌مرغتخم‌مرغ4 قطعه

ابزارهای مورد نیاز:

کرونومترکرونومتر
ترازوی دیجیتال آشپزخانهترازوی دیجیتال آشپزخانه
9

A globe that leaks, rings that scrape

Closed-globe egg beater troubleshooting.

Flow

Loading...
10

History and honest limits

**James M. Jay** of Canton, Ohio, assignor to himself and John Danner, received US 27,054, dated 7 February 1860. The halves are turned to break joints and fit tight; a hook on the cover hangs on a pivot between lugs, and a swinging catch holds the cover down; the shaft's bearings are in the lower half's edge, the cover cut to fit over them. He wrote that it does not matter whether one or more eggs are beaten. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Two bought bowls stand in for his turned halves, without a hinge. Your times are the result.

مواد

11

ابزارهای لازم

10

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...