هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
Martin

ایجاد شده توسط

Martin

6. اکتبر 2026NO
۸
۰
۰
۰
۰

Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box

A beater spun in a round bowl soon drags the whole mixture round with it. Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds." This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
متوسط
About 4 hours, plus printing

دستورالعمل‌ها

1

Tip speed and the corners

در حال بارگذاری دفترچهٔ Jupyter…
2

A geared beater a month before it

The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3

Read US 24,134

"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4

Print the dasher

Print the stepped double-spiral dasher (/uploads/blueprints/stepped-spiral-egg-beater-dasher.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

مواد مورد نیاز این مرحله:

فیلامنت PETGفیلامنت PETG1 قطعه

ابزارهای مورد نیاز:

چاپگر سه‌بعدی رشته‌ای (FDM)چاپگر سه‌بعدی رشته‌ای (FDM)
5

Build the box

Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.

مواد مورد نیاز این مرحله:

ورق تخته‌سه‌لاورق تخته‌سه‌لا1 قطعه
پیچ چوب #8 در ۱ اینچپیچ چوب #8 در ۱ اینچ1 قطعه
چسب درزگیر سیلیکونچسب درزگیر سیلیکون1 قطعه

ابزارهای مورد نیاز:

ارهٔ موییارهٔ مویی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
مجموعه پیچ‌گوشتیمجموعه پیچ‌گوشتی
خط‌کشخط‌کش
6

Fit the shaft and gears

Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.

مواد مورد نیاز این مرحله:

قطعهٔ چوب سختقطعهٔ چوب سخت1 قطعه
میلگرد فولاد نرممیلگرد فولاد نرم1 قطعه
مجموعهٔ چرخ‌دندهٔ مخروطی (فولاد، ۱:۱)مجموعهٔ چرخ‌دندهٔ مخروطی (فولاد، ۱:۱)1 قطعه
اپوکسی دوجزئیاپوکسی دوجزئی1 قطعه
واشر تختواشر تخت1 قطعه

ابزارهای مورد نیاز:

ارهٔ آهن‌برارهٔ آهن‌بر
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
گیرهٔ رومیزیگیرهٔ رومیزی
7

The patent drawing

US 24,134 drawing sheet, public domain (expired patent).
مرحله 7 - Image 1
8

Square box against round bowl

Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
مرحله 8 - Image 1

مواد مورد نیاز این مرحله:

تخم‌مرغتخم‌مرغ4 قطعه

ابزارهای مورد نیاز:

کاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزنکاسهٔ بزرگ مخلوط‌کردن فولاد زنگ‌نزن
کرونومترکرونومتر
9

A dasher that swirls, scrapes or slips

Stepped spiral egg beater troubleshooting.

Flow

Loading...
10

History and honest limits

**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.

مواد

10

ابزارهای لازم

10

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...