هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Cyanoacrylate Adhesive
Woody

ایجاد شده توسط

Woody

22. سپتامبر 2026NO
۲۴
۰
۰
۰
۰

Cyanoacrylate Adhesive

Harry Coover first met cyanoacrylates in 1942 while looking for a clear plastic for gun sights, and rejected them because they stuck to everything. In 1951 at Eastman Kodak he and Fred Joyner met them again - and this time saw a glue that set in seconds with no heat or pressure. It was sold from 1958. **US 2,794,788**, "Adhesive compositions containing alkyl esters of cyanoacrylic acid", Coover and Shearer, Eastman Kodak, filed 1. November 1952, granted 4. June 1957, claims the monomeric alkyl α-cyanoacrylate adhesive. **US 2,768,109**, "Alcohol-catalyzed alpha-cyanoacrylate adhesive compositions", Coover, filed 2. June 1954, granted 23. October 1956, claims "strongly bonding wood having an acidic surface character" by first moistening it with an alcohol of 1 to 8 carbon atoms. **You test that second claim on oak**, an acidic wood: dry, wiped with isopropyl alcohol, and misted with water.
مبتدی
1 hour plus 24 h

دستورالعمل‌ها

1

Cut the strips

Saw eighteen oak strips 80 x 20 mm, about 5 mm thick. Sand one end face of each with 180 grit and dust off. Pencil-mark three groups: dry, IPA, water.

مواد مورد نیاز این مرحله:

تختهٔ بلوط سفیدتختهٔ بلوط سفید1 قطعه
کاغذ سنبادهکاغذ سنباده1 ورق

ابزارهای مورد نیاز:

ارهٔ دستیارهٔ دستی
2

Prepare the surfaces

Leave the first group dry. Wipe the ends of the second with isopropyl alcohol on a towel and use them within a minute. Give the third one light mist of water and blot. Note the room humidity.

مواد مورد نیاز این مرحله:

ایزوپروپیل الکل ۹۹ ٪ایزوپروپیل الکل ۹۹ ٪10 میلی‌لیتر
حولهٔ کاغذیحولهٔ کاغذی2 ورق

ابزارهای مورد نیاز:

افشانهٔ آبافشانهٔ آب
رطوبت‌سنجرطوبت‌سنج
3

Glue and time

Gloves and glasses on. One drop of CA on one end, overlap a partner strip by 20 mm, press 5 seconds and start the stopwatch. Every 10 seconds hang the spring scale from the free strip and pull to 2 N: record when it first holds. Three joints per group.

مواد مورد نیاز این مرحله:

چسب آنی (سیانواکریلات)چسب آنی (سیانواکریلات)1 قطعه

ابزارهای مورد نیاز:

کرونومترکرونومتر
نیروسنج (ترازوی فنری)نیروسنج (ترازوی فنری)
دستکش نیتریلدستکش نیتریل
عینک ایمنی شفافعینک ایمنی شفاف
4

Break them tomorrow

After 24 hours clamp one strip of each joint in the vise and tap the free end sideways with the mallet until it breaks. Estimate how much of the bond area is torn wood.

ابزارهای مورد نیاز:

گیرهٔ رومیزیگیرهٔ رومیزی
چکش لاستیکیچکش لاستیکی
عینک ایمنی شفافعینک ایمنی شفاف
5

Set times and joints

در حال بارگذاری دفترچهٔ Jupyter…
6

History & Context

**What the patents specify:** a monomeric alkyl α-cyanoacrylate adhesive held liquid by an acid inhibitor, and, for acidic surfaces, a prior wipe with a C1–C8 alcohol. **Modern build (derived):** hardware-store CA glue on oak. CA spread from industry to every workshop, and in the Vietnam War medics used a CA spray to seal wounds; purpose-made medical grades followed. Its limits: brittle joints that fail in peel and impact, poor gap filling, and it bonds skin instantly - acetone releases it.
مرحله 6 - Image 1

مواد

5

ابزارهای لازم

9

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...