همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
پیشرفته
A day at the forge
دستورالعملها
1
1
Read Edwinson
Read Edwinson
"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2
2
Fold the eye
Fold the eye
Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).
مواد مورد نیاز این مرحله:
میلهٔ آهن چکشخوار1 قطعهابزارهای مورد نیاز:
کورهٔ آهنگری
سندان
پتک
انبر آهنگری
سنبه گشادکن سوراخ3
3
Close and shape the eye
Close and shape the eye
Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.
مواد مورد نیاز این مرحله:
پودر بوراکس1 قطعهابزارهای مورد نیاز:
کورهٔ آهنگری
سندان
چکش
سنبه گشادکن سوراخ4
4
Lay in the steel
Lay in the steel
Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.
مواد مورد نیاز این مرحله:
صفحهٔ فولاد چندلایهٔ کوبیده (شیر استیل)1 قطعه
پودر بوراکس1 قطعهابزارهای مورد نیاز:
کورهٔ آهنگری
سندان
پتک
انبر آهنگری5
5
Hatchet hammer (variant)
Hatchet hammer (variant)
For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.
مواد مورد نیاز این مرحله:
فولاد بوتهای1 قطعهابزارهای مورد نیاز:
کورهٔ آهنگری
سندان
چکش
قلم داغ6
6
Pare and smooth
Pare and smooth
Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.
ابزارهای مورد نیاز:
کورهٔ آهنگری
قلم داغ
سندان
چکش7
7
Harden, temper and grind
Harden, temper and grind
Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.
ابزارهای مورد نیاز:
کورهٔ آهنگری
سطل آبدهی
سنگ چرخان تیزکنی8
8
Hang the head (ours)
Hang the head (ours)
He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.
مواد مورد نیاز این مرحله:
قالب دستهٔ تبر چوبی (هیکوری)1 قطعه
گوههای چوبی1 قطعهابزارهای مورد نیاز:
کارد دودسته
چکش9
9
Troubleshooting
Troubleshooting
Axe troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.
مواد
6- 1 قطعهجایگزین
- 1 قطعهجایگزین
- جایگزین
- 1 قطعهجایگزین
- جایگزین
- 1 قطعهجایگزین
این نقشه میسازد
نقشههای مرتبط
این نقشهها دانش مشترکی دارند — تکنیکها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.




