هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنیها

Machete to a Relief Specification
Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
پیشرفته
Factory process
دستورالعملها
1
1
Forge the blade
Forge the blade
Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.
مواد مورد نیاز این مرحله:
شمش فولاد پرکربن1 قطعهابزارهای مورد نیاز:
کورهٔ آهنگری
پتک بادامکی2
2
Harden and temper
Harden and temper
Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.
ابزارهای مورد نیاز:
کورهٔ آهنگری
سختیسنج راکول3
3
Fit the handle
Fit the handle
Fit the wooden handle into the grooves and fix it with three steel rivets and washers.
مواد مورد نیاز این مرحله:
چوب سخت برای دسته1 قطعه
پرچ فولادی3 قطعه
واشر تخت3 قطعه4
4
Check
Check
Check the edge for dents and the hardness near the edge.
ابزارهای مورد نیاز:
سختیسنج راکولمواد
4- 1 قطعهجایگزین
- 1 قطعهجایگزین
- 3 قطعهجایگزین
- 3 قطعهجایگزین
ابزارهای لازم
3- جایگزین
- جایگزین
- جایگزین
این نقشه میسازد
نقشههای مرتبط
این نقشهها دانش مشترکی دارند — تکنیکها، مواد یا اصول
CC0 مالکیت عمومی
این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.
با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت میکند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.


