همکاری
هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Four-Edge Chatterless Countersinks: Two Pairs of Edges Set Off the Centre Lines, One Raked Each Way (Manewich, 1946)
Forge

ایجاد شده توسط

Forge

13. نوامبر 2026NO
۱۳
۰
۰
۰
۰

Four-Edge Chatterless Countersinks: Two Pairs of Edges Set Off the Centre Lines, One Raked Each Way (Manewich, 1946)

Joseph J. Manewich of Longmeadow, Massachusetts, received US 2,401,307, dated 4 June 1946, for a countersink that does not chatter. Four teeth are gashed in the cone. The inner ends of one pair of edges sit just ahead of a line through the centre, with their faces raked back. The other pair sit just behind a line at right angles, raked forwards. The edges keep changing how they meet the work as the tool goes in, and each steadies the one opposite, so it can run faster and leaves round, smooth countersinks. We make a set of three in tool steel. The patent gives no sizes or angles; ours are stated.
پیشرفته
About 1 day

دستورالعمل‌ها

1

Why the edges are set off the centre lines

در حال بارگذاری دفترچهٔ Jupyter…
2

Read US 2,401,307

"It has been found that the countersink tool by reason of its novel construction and arrangement may be operated at a higher speed than may those of the prior art while at the same time objectionable chatter is eliminated."
3

Turn the blanks

From octagonal tool steel turn three blanks: a 90 degree cone to a point, 12, 16 and 20 mm across, a short body 4 and an 8 mm shank 6 50 mm long with three filed flats. Heat each to a cherry red and let it cool slowly in the air.

مواد مورد نیاز این مرحله:

میلهٔ هشت‌گوش فولاد ابزارمیلهٔ هشت‌گوش فولاد ابزار2 قطعه

ابزارهای مورد نیاز:

تراش فلزتراش فلز
سه‌نظام تراشسه‌نظام تراش
رندهٔ تراشکاریرندهٔ تراشکاری
رندهٔ برش تراشرندهٔ برش تراش
نقالهنقاله
کولیس دیجیتال ۶ اینچیکولیس دیجیتال ۶ اینچی
مجموعه سوهانمجموعه سوهان
کورهٔ آهنگریکورهٔ آهنگری
انبر آهنگریانبر آهنگری
عینک ایمنیعینک ایمنی
4

Mark and gash the four teeth 8

Blue the cone and scribe two diameters across its end at right angles. Mark the positive pair's edges 10 parallel to the first diameter, 0.5 mm ahead of it in the direction of turning, and the negative pair's edges 12 parallel to the second, 0.5 mm behind it. File or grind a gash 11 ahead of each edge, down the cone: for the edges 10 the face raked back about 8 degrees (positive), for the edges 12 raked forward about 5 degrees (negative). Give each edge a little clearance behind it.

ابزارهای مورد نیاز:

مجموعه سوهان سوزنیمجموعه سوهان سوزنی
گیرهٔ ماشینگیرهٔ ماشین
مجموعه سوهانمجموعه سوهان
سنگ‌سنبادهٔ رومیزیسنگ‌سنبادهٔ رومیزی
نقالهنقاله
5

Harden and temper

Heat each head to a cherry red, until a magnet no longer sticks, and quench it point first in water, moving it about. Rub it bright with a stone, heat the shank gently 20 mm behind the head, and quench again as soon as a light straw colour reaches the cutting edges.

ابزارهای مورد نیاز:

کورهٔ آهنگریکورهٔ آهنگری
انبر آهنگریانبر آهنگری
آهن‌ربای کوچکآهن‌ربای کوچک
سطل آب‌دهیسطل آب‌دهی
آبآب
سنگ تیزکنیسنگ تیزکنی
دستکش جوشکاریدستکش جوشکاری
عینک ایمنیعینک ایمنی
6

Hone and test

Hone all four edges lightly with the stone. Countersink holes in hardwood and in a scrap of aluminium at a higher speed than usual: the cone should be round and smooth, with no chatter marks.

ابزارهای مورد نیاز:

سنگ تیزکنیسنگ تیزکنی
دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
تختهٔ چوب سختتختهٔ چوب سخت
عینک ایمنیعینک ایمنی
7

Troubleshooting

Four-edge countersink troubleshooting.

Flow

Loading...
8

History and honest limits

**Joseph J. Manewich** of Longmeadow, Massachusetts, US 2,401,307, dated 4 June 1946, filed 23 August 1944. He claimed cutting edges in two pairs, "the innermost portions of the cutting edges of one pair thereof disposed adjacent said longitudinal axis and forwardly" of a plane through it, and those of the other pair "rearwardly" of another plane at right angles. He calls the first positive edges with positive rake and the second negative with negative rake. He gives no sizes, offsets or angles; ours are stated, with the house hardening.

مواد

1

ابزارهای لازم

21

این نقشه می‌سازد

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...