هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Oriented Barium Ferrite Disc Magnet: Set in a 9500 Oersted Field (Gorter, Philips 1956, Ex. 1)
Charlie

ایجاد شده توسط

Charlie

28. اکتبر 2026DE
۳
۰
۰
۰
۰

Oriented Barium Ferrite Disc Magnet: Set in a 9500 Oersted Field (Gorter, Philips 1956, Ex. 1)

A ceramic magnet that is stronger in one direction. Pre-fired barium ferrite powder is suspended in polyvinyl acetate dissolved in acetone and set in a strong magnetic field, so its crystals line up. The block is heated to 500 °C in a weaker field and sintered at 1280 °C. In the principal direction it held 2,650 gauss with a coercive force of 1,775 oersted and a (BH)max of 1.3 × 10⁶; at right angles only 1,260 gauss. Source: E. W. Gorter, G. W. Rathenau and A. L. Stuyts (Philips), US 2,762,778 (1956), Example 1. They made blocks; disc size is ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
پیشرفته
3 days

دستورالعمل‌ها

1

Weigh barium carbonate and iron oxide

Weigh 450 g barium carbonate and 2000 g ferric oxide. Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

مواد مورد نیاز این مرحله:

کربنات باریم (ویتریت)کربنات باریم (ویتریت)450 گرم
اکسید فریکاکسید فریک2000 گرم

ابزارهای مورد نیاز:

ترازوی دو کفهترازوی دو کفه
دستکش لاستیکیدستکش لاستیکی
ماسک تنفسی P100ماسک تنفسی P100
2

Mill 20 hours under alcohol, dry

Grind the mixture in a ball mill under alcohol for 20 hours, then dry it.

ابزارهای مورد نیاز:

آسیاب گلوله‌ای آهنیآسیاب گلوله‌ای آهنی
اتانول - درجهٔ آزمایشگاهی، 95 %اتانول - درجهٔ آزمایشگاهی، 95 %
کورهٔ خشک‌کردنکورهٔ خشک‌کردن
3

Pre-fire: through a 1100 °C zone in 10 minutes

Pass the dry powder at 20 mm per minute through an electric furnace with a 20 cm hot zone at 1100 °C, in air: 10 minutes in the heat. Let it cool.

ابزارهای مورد نیاز:

کورهٔ لوله‌ایکورهٔ لوله‌ای
بوته با درپوش (چینی)بوته با درپوش (چینی)
دستکش گرمااستواردستکش گرمااستوار
4

Grind 12 hours with alcohol, dry

Pulverise the pre-fired material in a ball mill with alcohol for 12 hours, then dry it. This is the pre-fired powder.

ابزارهای مورد نیاز:

آسیاب گلوله‌ای آهنیآسیاب گلوله‌ای آهنی
اتانول - درجهٔ آزمایشگاهی، 95 %اتانول - درجهٔ آزمایشگاهی، 95 %
کورهٔ خشک‌کردنکورهٔ خشک‌کردن
5

Stir into 16 % polyvinyl acetate in acetone

Dissolve polyvinyl acetate in acetone to a 16 % solution and stir the pre-fired powder into it, 2 cc of solution per gram of powder. The binder burns off later.

ابزارهای مورد نیاز:

پلی‌وینیل استاتپلی‌وینیل استات
استوناستون
ترازوی دو کفهترازوی دو کفه
6

Orient in a 9500 oersted field

Put the suspension in a brass die between the poles of a magnet yoke and apply a first field of 9500 oersted. Let the acetone evaporate while the field is on. A small block forms.

ابزارهای مورد نیاز:

قالب پرس دیسکقالب پرس دیسک
آهن‌ربای برقیآهن‌ربای برقی
پرس هیدرولیکپرس هیدرولیک
7

Heat to 500 °C in a 2000 oersted field

Put the block in an electric furnace between the magnet's poles. With a second field of 2000 oersted along the first field's direction, heat to 500 °C, which burns off the rest of the binder. Then switch the field off.

ابزارهای مورد نیاز:

کورهٔ لوله‌ایکورهٔ لوله‌ای
آهن‌ربای برقیآهن‌ربای برقی
دستکش گرمااستواردستکش گرمااستوار
8

Sinter: through a 1280 °C zone in 5 minutes

Pass the block at 20 mm per minute through an electric furnace in air at 1280 °C with a 10 cm hot zone: about 5 minutes in the heat.

ابزارهای مورد نیاز:

کورهٔ لوله‌ایکورهٔ لوله‌ای
دستکش گرمااستواردستکش گرمااستوار
9

Magnetise in the principal direction

Magnetise the block along the direction of the first field, the principal direction. The patent magnetises it in a field in that direction; ours: an electromagnet. Find the north face with a compass.

ابزارهای مورد نیاز:

آهن‌ربای برقیآهن‌ربای برقی
قطب‌نماقطب‌نما

مواد

2

ابزارهای لازم

15

این نقشه می‌سازد

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...