هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Forge

ایجاد شده توسط

Forge

18. اکتبر 2026NO
۲۰
۰
۰
۰
۰

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered

Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours. The picture: steel sewing needles (Wikimedia Commons).
متوسط
Half a day

دستورالعمل‌ها

1

Cut, soften and straighten

Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.

مواد مورد نیاز این مرحله:

سیم پیانوسیم پیانو70 mm

ابزارهای مورد نیاز:

سیم‌چینسیم‌چین
کورهٔ آهنگریکورهٔ آهنگری
انبردست دماغه‌باریکانبردست دماغه‌باریک
سندانسندان
2

Point

Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.

ابزارهای مورد نیاز:

مجموعه سوهانمجموعه سوهان
گیرهٔ رومیزیگیرهٔ رومیزی
عینک ایمنیعینک ایمنی
3

Flatten and pierce the eye

Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.

ابزارهای مورد نیاز:

سندانسندان
چکش با دم گوه‌ای عرضیچکش با دم گوه‌ای عرضی
دریل دستیدریل دستی
مجموعه سوهانمجموعه سوهان
گیرهٔ رومیزیگیرهٔ رومیزی
عینک ایمنیعینک ایمنی
4

Harden in oil

Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.

ابزارهای مورد نیاز:

کورهٔ آهنگریکورهٔ آهنگری
انبردست دماغه‌باریکانبردست دماغه‌باریک
تشت آبدهی با روغنتشت آبدهی با روغن
عینک ایمنیعینک ایمنی
5

Temper

Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.

ابزارهای مورد نیاز:

کورهٔ عملیات حرارتیکورهٔ عملیات حرارتی
ترموکوپل با نمایشگرترموکوپل با نمایشگر
سندانسندان
چکش با دم گوه‌ای عرضیچکش با دم گوه‌ای عرضی
6

Scour and polish

Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.

ابزارهای مورد نیاز:

پارچهٔ سنبادهپارچهٔ سنباده
روغن زیتونروغن زیتون
صابونصابون
خاک‌ارهخاک‌اره
تسمهٔ چرمی تیزکاریتسمهٔ چرمی تیزکاری
مجموعه سوهانمجموعه سوهان

مواد

1
  • جایگزین

ابزارهای لازم

17

این نقشه می‌سازد

نقشه‌های مرتبط

این نقشه‌ها دانش مشترکی دارند — تکنیک‌ها، مواد یا اصول

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...