هنر
زیبایی و سلامت
صنایع دستی
فرهنگ و تاریخ
سرگرمی
محیط زیست
غذا و نوشیدنی
مهندسی معکوس
علوم
ورزش
فناوری
پوشیدنی‌ها
The Savonius Rotor: Two Hollow Vanes, Any Wind, Always Starts
Volt

ایجاد شده توسط

Volt

27. سپتامبر 2026SE
۱۰
۰
۰
۰
۰

The Savonius Rotor: Two Hollow Vanes, Any Wind, Always Starts

Cut a cylinder in half lengthwise, slide the halves apart so they overlap, and stand them on a vertical shaft: that is the rotor Sigurd Savonius of Finland patented in 1924–29. The wind pushes harder on the hollow of one vane than on the back of the other, and air flowing through the overlap from one hollow into the other helps it along. It turns in wind from any direction without steering, starts itself in the lightest breeze, and gives strong torque at low speed — for pumping water, ventilating, or driving a current meter. It is also slow and inefficient, because it is pushed by drag. This rung works out the drag machine's ceiling and builds a Savonius rotor from a PVC pipe, measuring its torque with a string brake.
مبتدی
About 4 hours

دستورالعمل‌ها

1

Read Savonius's overlap

US 1,697,574, 'Rotor Adapted to be Driven by Wind or Flowing Water', Sigurd J. Savonius. The vanes are *"hollow-shaped"* and *"overlapping"*, so that the space between them forms an air passage *"from the hollow side of the vane d, to the hollow side of the other vane c"*. His text compares it with the rotating cylinder then being studied at the Aerodynamische Versuchsanstalt in Göttingen, which it cites. The overlap is the detail that separates a Savonius rotor from two cups on a stick.
2

The drag machine's ceiling

در حال بارگذاری دفترچهٔ Jupyter…
3

Build it from a PVC pipe

Cut a 300 mm length of 110 mm PVC pipe in half lengthwise with a saw. Cut two plywood end discs 240 mm across. Screw the two half-pipes between the discs, hollow faces opposite, each shifted towards the centre so they **overlap by about a fifth of a half-pipe's width**, leaving the air passage Savonius describes. Run a threaded-rod shaft through the centre of both discs, held by nuts, and carry it vertically in two skateboard bearings in a plywood frame.

مواد مورد نیاز این مرحله:

لوله پی‌وی‌سیلوله پی‌وی‌سی1 قطعه
ورق تخته‌سه‌لاورق تخته‌سه‌لا1 ورق
میلهٔ رزوه‌شدهمیلهٔ رزوه‌شده1 قطعه
بلبرینگ اسکیت‌بردبلبرینگ اسکیت‌برد2 قطعه
پیچ‌های ماشینیپیچ‌های ماشینی12 قطعه

ابزارهای مورد نیاز:

دریل شارژیدریل شارژی
مجموعه متهمجموعه مته
آچار فرانسهآچار فرانسه
خط‌کشخط‌کش
لوله‌برلوله‌بر
4

Measure torque with a string brake

Wrap fishing line once round the shaft. Tie one end to the spring scale fixed to the frame, and hang a small weight on the other end, so the line rubs on the turning shaft as a brake. The braking torque is **(weight − scale reading) × shaft radius**. Put the rotor in front of the box fan. Start with a light weight: the rotor spins fast. Add weight step by step, reading the speed with the tachometer and the scale each time, until it stalls. Power = torque × angular speed. Turn the rotor to face the wind at a different angle: it does not care. Start the fan at its lowest setting with the rotor stopped: it starts by itself. Those two facts are why Savonius rotors exist.

مواد مورد نیاز این مرحله:

نخ ماهیگیری (تک‌رشته)نخ ماهیگیری (تک‌رشته)1 رول
وزنهوزنه1 مجموعه

ابزارهای مورد نیاز:

پنکهٔ جعبه‌ای (سرعت متغیر)پنکهٔ جعبه‌ای (سرعت متغیر)
بادسنج دستیبادسنج دستی
دورسنج دیجیتالدورسنج دیجیتال
نیروسنج (ترازوی فنری)نیروسنج (ترازوی فنری)
کولیس دیجیتال ۶ اینچیکولیس دیجیتال ۶ اینچی
5

History and context

**US 1,697,574, 'Rotor Adapted to be Driven by Wind or Flowing Water', Sigurd J. Savonius; filed 13 August 1925 (Serial 49,985), claiming a Finnish filing of 12 December 1924; granted 1 January 1929.** The title names water as well as wind: the same rotor turns in a current. **Honest limits.** Low efficiency — a drag machine cannot beat the notebook's ceiling by much. Heavy for its power, because the whole swept area is solid vane. Its torque pulses twice per turn, which is why many are built as two stages twisted 90° apart, or with helical vanes.

مواد

7

ابزارهای لازم

10

CC0 مالکیت عمومی

این نقشه تحت مجوز CC0 منتشر شده است. شما آزاد هستید آن را کپی، ویرایش، توزیع و برای هر هدفی بدون نیاز به اجازه استفاده کنید.

با خرید محصولات از طریق نقشه از سازنده حمایت کنید و او کمیسیون سازنده تعیین شده توسط فروشندگان، دریافت می‌کند یا یک نسخه جدید از این نقشه ایجاد کنید و آن را به عنوان اتصال در نقشه خود قرار دهید تا درآمد به اشتراک گذاشته شود.

بحث و گفتگو

(0)

ورود برای شرکت در بحث

در حال بارگذاری نظرات...