LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Carbon-Steel Pan and Its Seasoning
The hob in this batch heats the PAN, not the food, so the pan is half the appliance - and the catalogue had no cookware at all. A carbon-steel pan is the plainest version: a disc of plain steel, shaped, then given the film that makes it usable. That film is not oil but a polymer, made in your own oven from a drying oil the way varnish sets on wood.
**No patent is cited**: pans are older than patents, and the seasoning is craft knowledge, not a claimed invention. What it needs is stating accurately, which this does.
**Use plain, uncoated steel only.** Galvanised sheet gives off zinc fumes when heated and must never be used for cookware. Season with a food oil - not hardware-shop boiled linseed oil, which carries metal driers.
Miðlungs
5 hours over two days
Leiðbeiningar
1
1
Cut a disc
Cut a disc
Mark a 200 mm circle on 2 mm plain (not galvanised, not coated) mild steel sheet and cut it out with the angle grinder. Round the edge with a file until it is safe to hold.
Efni fyrir þetta skref:
Plata úr mjúku stáli1 stykkiNauðsynleg verkfæri:
Vinkilslípirokkur
Málmþjöl
Tær öryggisgleraugu
Suðuhanskar2
2
Dish it
Dish it
Work from the centre outwards with the ball-peen hammer over a shallow hollow in a block, turning the disc as you go, until it has a 10 mm dish. Stop before the edge ripples.
Nauðsynleg verkfæri:
Kúluhamar
Stálreglustika3
3
Back to bare metal
Back to bare metal
Scour both faces with steel wool until the surface is uniform grey with no mill scale, rust or oil. Wash, dry over heat, and weigh on the precision scale.
Efni fyrir þetta skref:
Stálull - nr. 1 meðalgróf1 stykkiNauðsynleg verkfæri:
Nákvæm stafræn vog
Rykgríma4
4
Season, thin and hot
Season, thin and hot
Wipe on a few drops of cooking oil and then wipe it off again, so the metal only looks faintly damp. Bake at 230 °C for one hour with the window open, cool, weigh. Repeat four times. Thick coats go sticky and flake - that is the commonest mistake.
Efni fyrir þetta skref:
Matarolía20 ml
Eldhúspappír4 plöturNauðsynleg verkfæri:
BorðofnNákvæm stafræn vog
Innrauður hitamælir5
5
Three tests
Three tests
Water: a drop should bead and run, not wet the surface. Rust: leave a bare offcut and the seasoned pan damp overnight and compare. Food: fry an egg with a little oil on a hot pan and see whether it releases.
Efni fyrir þetta skref:
Egg1 stykkiNauðsynleg verkfæri:
Innrauður hitamælir6
6
Will a hob see it?
Will a hob see it?
Hold a magnet to the base: it grips, because plain steel is ferromagnetic. That is the whole requirement of an induction hob - and why the aluminium pan in this batch's hob blueprint does nothing.
Nauðsynleg verkfæri:
Neodym-seglasett7
7
Coats, siblings and heat
Coats, siblings and heat
Hleð Jupyter-vinnubók…
8
8
History & Context
History & Context
**What this is:** the cookware rung the hob needs - plain ferromagnetic steel, given a polymerised-oil surface. **How it relates:** the film is a drying oil cross-linked by heat, the same chemistry as the resins in batch 97; PTFE is the industrial answer to the same problem.
Carbon steel is what restaurant pans and woks are made of, and a seasoning is repairable at home - scour it back and bake it again. Its limits: it rusts if left wet, acidic food strips the film, and the seasoning must be rebuilt now and then.
Efni
5- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 20 mlStaðgengill
- 4 plöturStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
11- 1 vendor sell this, none ship to you yetStaðgengill
- Staðgengill
- Staðgengill
- Suðuhanskar10% þóknunStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.