Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Byrjandi
Unknown
Leiðbeiningar
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Efni fyrir þetta skref:
Flatstál úr mjúku stáli1 turning toolsNauðsynleg verkfæri:
Járnsög
Hamar
Steðji
Málmþjöl2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Efni fyrir þetta skref:
Furuborð1 board support
Trétappi1 turning stick
Járnnaglar1 stick pointNauðsynleg verkfæri:
JárnsögMálmþjölHamar3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Efni fyrir þetta skref:
Harðviðarplanki1 ribsNauðsynleg verkfæri:
JárnsögMálmþjölEfni
5- 1 turning toolsStaðgengill
- 1 board supportStaðgengill
- 1 turning stickStaðgengill
- 1 stick pointStaðgengill
- 1 ribsStaðgengill
Efni úr tengdum teikningum
10% eignun
Mild Steel Bar Stock Forged from an Ingot
eftir Forge
Nútíma
43
0
0
0
5
0
10% eignun
Pine Boards with a Chainsaw Mill
eftir Woody
Trésmiði
43
0
0
0
1
0
10% eignun
Riven Hardwood Dowels with a Dowel Plate
eftir Woody
Trésmiði
54
0
0
0
1
0
10% eignun
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
eftir Forge
Neglur
61
0
0
0
3
0
Þessi teikning býr til
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.