Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker.
Result: a nose-and-mouth dust mask with a filter you can replace.
Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Byrjandi
Unknown
Leiðbeiningar
1
1
Make the guard
Make the guard
Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.
Efni fyrir þetta skref:
Óþekktur efniviður1 guardNauðsynleg verkfæri:
Handbor
Óþekkt mál2
2
Fit the filter clips
Fit the filter clips
Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.
Efni fyrir þetta skref:
Fjaðurstálsvír1 clips
Óþekktur málmur1 rivetsNauðsynleg verkfæri:
Kringlunefjatöng
Hnoðsett3
3
Make the head strap
Make the head strap
Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.
Efni fyrir þetta skref:
Teygjusnúra1 strapÓþekktur málmur1 two hooksNauðsynleg verkfæri:
SkæriKringlunefjatöng4
4
Fit the filter and wear it
Fit the filter and wear it
Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.
Efni fyrir þetta skref:
Óþekkt efni1 filterNauðsynleg verkfæri:
SkæriEfni
5- 1 guardStaðgengill
- 1 clipsStaðgengill
- 1 two hooksStaðgengill
- 1 strapStaðgengill
- 1 filterStaðgengill
Efni úr tengdum teikningum
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.