LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI

Spring Steel Strip and Wire, Hardened and Tempered
A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue.
It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
Lengra kominn
A day
Leiðbeiningar
1
1
Forge strip
Forge strip
Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.
Efni fyrir þetta skref:
Deiglustál1 kg
Viðarkol10 kgNauðsynleg verkfæri:
Smiðjueldstæði
Steðji
Járnsmiðshamar
Sléttari
Járnsmiðstöng
Leðursvunta
Suðuhanskar
Öryggisgleraugu2
2
Anneal
Anneal
Heat to a dull red and bury it in dry wood ash to cool slowly overnight.
Efni fyrir þetta skref:
Harðviðaraska2 kgNauðsynleg verkfæri:
Málmfata3
3
Draw wire
Draw wire
For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.
Efni fyrir þetta skref:
Býflugnavax10 gNauðsynleg verkfæri:
Dráttarplata úr stáli
Dráttartöng
Skrúfstykki4
4
Harden
Harden
Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.
Efni fyrir þetta skref:
Repjuolía5 lítrarNauðsynleg verkfæri:
Smiðjueldstæði
Segull
Málmfata með loki
Járnsmiðstöng
Suðuhanskar5
5
Clean bright
Clean bright
Sand a stripe bright on the hardened steel so you can see the temper colours.
Nauðsynleg verkfæri:
Sandpappírsörk6
6
Temper to blue
Temper to blue
Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.
Nauðsynleg verkfæri:
Própanbrennari
Eldfastur steinn
Járnsmiðstöng7
7
Test
Test
Clamp one end in the vise and bend the free end a little: it must spring back straight.
Nauðsynleg verkfæri:
Skrúfstykki
Stafrænn skífmælir 6 tommur8
8
Troubleshooting
Troubleshooting
Spring tempering troubleshooting.
Flow
Loading...
Efni
5- 1 kgStaðgengill
- 10 kgStaðgengill
- 2 kgStaðgengill
- 10 gStaðgengill
- 5 lítrarStaðgengill
Nauðsynleg verkfæri
18- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.





