LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Glass Cutter: Monce's Hardened Steel Wheel
S. G. Monce's glass cutter (US 91,150, 1869): a small hardened steel wheel, bevelled from both sides to a sharp edge, turning on its own journals in a riveted frame on a handle. Drawn across the glass under pressure it rolls and scores a fine line like a diamond's, for a tenth of a diamond's cost, and it needs less skill. It is the wheel cutter still used today.
The patent gives no sizes, steel grade or hardening method. The picture: the patent's drawing sheet.
Miðlungs
1 day
Leiðbeiningar
1
1
Turn the steel wheel
Turn the steel wheel
Turn a steel roller smooth and round, with a solid journal (d) at each end. Its sides (a) run parallel for a short way, then bevel toward each other to meet about midway in the cutting edge (D). Each bevel (c) stands about 45° to the axis, so the two faces are near right angles, or a very little more obtuse. Ours: a hardenable carbon steel and the lathe.
Efni fyrir þetta skref:
Kolefnisstálstöng (0,6 % C)1 stykkiNauðsynleg verkfæri:
Málmrennibekkur
Rennibekkjarstál
Járnsög2
2
Harden the wheel
Harden the wheel
Harden the turned wheel. The patent does not say how; ours: heat it in the forge and quench it, as in the connected heat-treatment blueprint.
Nauðsynleg verkfæri:
Aflinn
Vatn3
3
Make the two-piece frame
Make the two-piece frame
Make the frame (B) in two halves. Near one end drill a bearing in each half for the journals. Keep each journal a little shorter than the thickness of the frame's sides (e), so a straightedge laid against the sides never touches the journal ends. Ours: steel strip, drill and file.
Efni fyrir þetta skref:
Kolefnisstálborði1 stykkiNauðsynleg verkfæri:
Járnsög
Handbor
Málmþjöl
Skrúfstykki4
4
Rivet the wheel into the frame
Rivet the wheel into the frame
Set the wheel's journals in the bearings, close the two halves on it and rivet them together. The wheel must turn freely.
Efni fyrir þetta skref:
Glerskurðarhjól1 stykki
Stálhnoð1 stykkiNauðsynleg verkfæri:
KúluhamarSkrúfstykki5
5
Fit the handle
Fit the handle
Fix the frame to a handle of any form, by any sound means. Monce used the handle of an ordinary diamond glass cutter.
Efni fyrir þetta skref:
Skaft1 stykkiNauðsynleg verkfæri:
Kúluhamar6
6
Score and break glass
Score and break glass
Draw the cutter quickly across the glass, pressing as you go, so the wheel rolls. It leaves a fine line like a diamond's. Guide it along a straightedge; the frame's sides ride on the edge. Break the glass along the line.
Nauðsynleg verkfæri:
Réttskeið
GlerrúðaEfni
5- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.