Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Handle: a Wired Tinplate Lifting Handle, Riveted and Soldered On (Hasluck, 1907)
A tinsmith's lifting handle is a strip of tinplate cut to a tapering pattern, stiffened with wire along its edges and bent so its narrow end curls into a ring, then riveted and soldered to the vessel.
Paul N. Hasluck's Tinplate Work (1907) gives it for the strainer of a fish kettle (Figs. 185-186). He gives no sizes for the pattern or the wire; those are unknown here.
Source: P. N. Hasluck, Tinplate Work (1907), pp. 89-90. Picture: his Figs. 185 and 186.
Byrjandi
An hour for a pair
Leiðbeiningar
1
1
Read Hasluck
Read Hasluck
"Having cut two to this pattern, wire the edges, and bend to the shape of Fig. 186, letting the narrow part of the pattern form the ring; then rivet and solder them to the strainer."
2
2
Cut to the pattern
Cut to the pattern
Mark out the handle on tinplate to the pattern of Fig. 185, a long strip tapering to a narrow end, and cut it out with snips; cut two for a pair. Hasluck gives no sizes (unknown).
Efni fyrir þetta skref:
Blikkplata1 two stripsNauðsynleg verkfæri:
Rissnál
Plötuklippur
Óþekkt mál3
3
Wire the edges
Wire the edges
Wire the edges of each strip: The gauge for the handles is not given; the strainer they are made for is wired with No. 10 B.W.G. tinned wire.
Efni fyrir þetta skref:
Járnvír1 edgesNauðsynleg verkfæri:
Trésleggja
Hæll4
4
Bend the ring
Bend the ring
Bend the strip to the shape of Fig. 186, curling the narrow end of the pattern round into the ring you lift by.
Nauðsynleg verkfæri:
TrésleggjaHæll5
5
Rivet and solder on
Rivet and solder on
Punch the rivet holes, rivet the flat end of the handle to the vessel, and solder it.
Efni fyrir þetta skref:
Járnhnoð1 per handle
Tin-blý lóðmálmur1 small amountNauðsynleg verkfæri:
Gatstimpill fyrir þynnu
Hnoðhamar
Rafmagnslóðbolti
Lóðfeiti6
6
History and honest limits
History and honest limits
In Hasluck this handle lifts the perforated strainer out of a fish kettle; his colander has a pair of bow handles riveted on opposite each other.
He gives the pattern by figure only, with no sizes, and does not say which wire goes in the handle edges; the tools are ours.
Efni
4- 1 two stripsStaðgengill
- 1 edgesStaðgengill
- 1 per handleStaðgengill
- 1 small amountStaðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.