
Building a Langspil — The Icelandic Drone Zither
Leiðbeiningar
Melody and drone from one box
Melody and drone from one box
Cut the soundbox parts
Cut the soundbox parts
Efni fyrir þetta skref:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 pieceNauðsynleg verkfæri:
HacksawGlue the box frame
Glue the box frame
Efni fyrir þetta skref:
PVA Wood Glue1 pieceFit the soundboard
Fit the soundboard
Efni fyrir þetta skref:
Dry Softwood Board1 piece
PVA Wood Glue1 pieceCut a soundhole
Cut a soundhole
Nauðsynleg verkfæri:
Sloyd Carving KnifeDrill the peg holes
Drill the peg holes
Nauðsynleg verkfæri:
AwlFit the tuning pegs
Fit the tuning pegs
Efni fyrir þetta skref:
Tuning Pegs3 pieceCarve the nut and bridge
Carve the nut and bridge
Nauðsynleg verkfæri:
Sloyd Carving KnifeString it
String it
Efni fyrir þetta skref:
Steel Music Wire1 pieceSet the frets
Set the frets
Efni fyrir þetta skref:
Fret Wire1 pieceNauðsynleg verkfæri:
Metal FileTune the drones
Tune the drones
Tune the melody string
Tune the melody string
Play it
Play it
Compendium — the drone zither
Compendium — the drone zither
Efni
6- Staðgengill
- 2 pieceStaðgengill
- 1 pieceStaðgengill
- 3 pieceStaðgengill
- 1 pieceStaðgengill
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack), try:
CDX Softwood Plywood
Fire-Rated Plywood - Instead of Steel Music Wire 0.032", try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.